Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. CALDARO AB
  3. S11

S11

S11
1 / 2 PagesView full catalog

S11

Product catalog summary
Overview: The Sensor S11 is a compact and robust contactless hall sensor designed for narrow and exposed positions. It features a metal housing that is only 6.2 millimeters thick, making it suitable for harsh environments. The sensor is capable of over 100 million revolutions, ensuring a long lifespan.
Specifications:
  • Output Types: Single, dual, or dual independent outputs.
  • Mechanical Rotating Angle: 360° endless rotation.
  • Starting Torque: Below 5 mN•m (50 gf•cm).
  • Current Consumption: Max 16 mA for single output, max 32 mA for dual output.
  • Independent Linearity Tolerance: Within ±1% FS.
  • Electrical Rotating Angle: 360°.
  • Applied Voltage: 5 V.D.C. ±10%.
  • Effective Output: 10 ±3%~90 ±3% Vin.
  • Dielectric Strength: 1 minute at 500 V.A.C.
  • Insulation Resistance: Over 1,000 MΩ at 500 V.D.C.
  • Operating Temperature Range: -40°C to +105°C.
  • Index of Protection: IP65, IP67 for the incorporated PCB part only.
  • EMS Tolerance: 100 V/m 80 MHz~6 GHz (ISO11452-1~-3).
  • ESD Tolerance: ±8 kV Contact discharge / ±15 kV Air discharge (IEC 61000-4-2).
  • Mechanical Life Expectancy: Approx. 100,000,000 shaft revolutions.
  • Mass: Approx. 11g.
Recommendations: Exercise caution when using organic solvents such as acetone, oil, or alcohol solutions like ethanol, as they can cause chemical burns on the plastic surface. Extra caution is advised in environments requiring chemical resistance.
Output Characteristics: The sensor provides various output configurations, including single, dual, and dual independent outputs, with detailed terminal diagrams provided for each configuration.
See more

Catalog excerpts

S11-1

Tiny and tough The S11 is an extremely compact sensor that can fit almost anywhere, just 6.2 millimetres thick, 28.8 millimetres wide and weighing only 11 grams. Despite its small dimensions, it is designed to withstand the harshest environments. Ideal for narrow and exposed positions ● Over dual, or dual independent outputs housing, only 6.2 millimetres thick degrees endless rotation Probably a longer life expectancy than you need The tight and sealed metal housing makes this small sensor a lot tougher than you might expect at first glance. And one hundred million revolu- tions are a lot. The S11 contactless hall sensor will keep on doing the job almost forever. CALDARO AB • HQ Stockholm Sweden, +46 (0)8-736 12 70 • [email protected] • www.caldaro.com United Kingdom: [email protected] • Germany: [email protected] • USA: info@calda

 Open the catalog to page 1
S11-2

Use caution; Organic solvents such as acetone, oil or alcohol solutions such as ethanol droplet could leave chemical burn scars on plastic surface. Any environments where chemical proofs (Organic solvent resistance, alcohol resistance, etc) are required, extra caution should be exercised. Terminal diagrams Output Charactaristics Single output OUTB OUTA OUTB (In case of a parallel output) (In case of a cross output) Output Voltage White: OUTA Black: G-A (GND) Dual output Red: IN-A (5V) White: OUTA Blue: OUT B Black: G-A (GND) Red: IN-A (5V) White: OUTA 180 Electrical rotating angle Rotating angle...

 Open the catalog to page 2

All CALDARO AB catalogs and technical brochures

  1. S06
    S06

    1  Page

  2. S09
    S09

    2  Pages

  3. C16
    C16

    2  Pages

  4. C14
    C14

    2  Pages

  5. C15
    C15

    2  Pages

  6. JOYSTICK C03B
    JOYSTICK C03B

    2  Pages

  7. S04
    S04

    1  Page

  8. Pedal P05
    Pedal P05

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.