DATA SHEETInfo DeoxIT® Shield SN5 Spray, S-Series Contact Cleaner & Rejuvenator 1. Part No.: SN5S-6N and SN5S-2N 2. Container Size: 163 g (5.75 oz.) and 40 g (1.4 oz. ) 3. Product Description: Contact lubricant and protectant for metal surfaces. Oxidation and corrosion deterent. Improves conductivity, maintains optimum signal quality. DeoxIT® Shield also reduces wear and abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for severe environments. On oxidized surfaces, pre-treat with DeoxIT® D-Series contact cleaner. Temperature range: -34OC to +210OC. 4. Features/Benefits: 5% Spray - Perfect-StrawTM, Quick Dry Solvent, Non-Drip, Safe on most plastics. DeoxIT® Shield S100L concentrate has 0.0% chemical cleaning action. Ideal for severe environments (humidity, salts, pollutants, sulfur, etc.) Excellent protection, good conductivity enhancing, excellent lubrication. Creates a long lasting barrier against oxidation and corrosion. No ozone depletion. Reduces intermittent connections, arcing, RFI, wear and abrasion.. Cleaner Audio - Clearer Video - Reliable Data. 5. Formulation: 5% 60-90% 15-30% DeoxIT® Shield S100L SOLSTICE® PF TRANS-1,3,3,3-TETRAFLUORO-PROP-1-ENE (CAS 29118-24-9) 6. Which DeoxIT® product do I Use:  Use DeoxIT® D-Series contact cleaner on surfaces that have been in service or have visual signs of oxidation. Contains 20% active cleaner.  Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active cleaner.  Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants, sulfur, etc.). Use on clean surface. Contains 0% active cleaner. Home of the DeoxIT® family of Environmentally-Safer Contact Cleaners and Connector Enhancing Treatmen

7. Directions for Use: 1. Turn off, unplug the device. 2. On surfaces that have been in service or have visual signs of oxidation or corrosion pre-treat with DeoxIT® D-Series (D5S-6) contact cleaner (see Data Sheet DS-D5S-6) or other cleaning process (ultra-sonics). Components, contacts and connectors may appear to be clean; however, they may have slight oxidation on the surfaces. When in doubt, first clean with DeoxIT® D-Series. You do not want apply DeoxIT® Shield S-Series over dirty/oxidized metal surfaces. 3. Apply one short burst of DeoxIT® Shield S-Series contact protector to contact/connector...

10. Product Selection Guides: DeoxIT7 - Spray Selection Guide Product Series FP = Flushing properties QD = Quick dry / non drip NF = Nonflammable PC = Plastics compatibility VOC = VOC (%) 11. Materials Compatibility (Plastics, Rubber, Elastomeric and Metals): (Rating: Not compatible, Poor, Fair, Good, Excellent), (N/A = Not applicable (no solvents and propellants) (* If the product is not 100% DeoxIT® then the package is rated before and after the solvents/propellants are applied to materials. Compatibility testing is always recommended) Material Name Rating (*with solvents) ABS Nylon Lexan HDPE...

12. Shipping and Additional Information: Hazardous: VOC (%): 13. Other Information: RoHS Compliant: VOC Compliant: MSDS Link, SN5S DeoxIT® Product Sheet: CAIG Essential Guide: WHY DeoxIT® is Different: 14. MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate. However, neither CAIG Laboratories, Inc., or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. In particular, improper use of our products and...