DATA SHEETInfo DeoxIT® Gold G5 Spray, G-Series Contact Enhancer, Conditioner & Protector 1. Part No.: G5S-6 2. Container Size: 142 g (5.0 oz.), with Low-Med-High Valve 3. Product Description: Unique contact treatment, conditioner, enhancer, lubricant and protectant for PLATED metal surfaces. Improves conductivity, maintains optimum signal quality, reduces fretting & dendrite corrosion, and stabilizes connections between similar and dissimilar metals. Molecularly bonds to both base-metals and plated surfaces and seals out oxygen, protecting both surfaces. The DeoxIT® Gold coating is excellent at reducing wear abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for gold plated surfaces. On oxidized surfaces, pre-treat with DeoxIT® D-Series contact rejuvenator. Temperature* range: -45 to +240OC. 4. Features/Benefits: 5% Spray, with L-M-H valve - Flushing action, Safe on most plastics. DeoxIT® Gold G100L concentrate has approximately 0.5% chemical deoxidizing action. Excellent conductivity enhancing, excellent protection, minimum deoxidizing, no ozone depletion. Prevents dendrite and fretting corrosion. Protects base metals. Reduces intermittent connections, arcing, RFI, wear and abrasion. Ideal for both stationary and moving (vibration) connections. Cleaner Audio - Clearer Video - Reliable Data. 5. Formulation: 5% DeoxIT® Gold G100L 75% Odorless mineral spirits (CAS 64742-88-7) 20% DIFLUOROETHANE (CAS 75-37-6) 6. Which DeoxIT® product do I Use:  Use DeoxIT® D-Series contact treatment on surfaces that have been in service or have visual signs of oxidation. Contains 20% active deoxidizer.  Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active deoxidizer.  Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants, sulfur, etc.). Use on clean surface. Contains 0% active deoxider. * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly

7. Directions for Use: 1. Turn off, unplug the device. 2. On surfaces that have been in service or have visual signs of oxidation or corrosion pre-treat with DeoxIT® D-Series (D5S-6) contact rejuvenator (see Data Sheet DS-D5S-6). 3. Apply one short burst of DeoxIT® Gold G-Series contact enhancer to contact/connector surface. 4. Operate the part/device to help distribute the DeoxIT® Gold and break up minor amounts of oxides and contamination. Wait a few seconds, reapply one short burst. Wait two minutes before turning on equipment. Test for compatibility before use. 5. If you notice a green or...

10. Materials Compatibility (Plastics, Rubber, Elastomeric and Metals): (Rating: Not compatible, Poor, Fair, Good, Excellent), (N/A = Not applicable (no solvents and propellants) (* If the product is not 100% DeoxIT® then the package is rated before and after the solvents/propellants are applied to materials. Compatibility testing is always recommended) Material Name Rating (*with solvents) ABS Nylon Lexan HDPE LDPE C.E.Phenolic Epoxy Polycarbonate PMMA POM PP PS PTFE PVC TPE/Rubber/Varnish Excellent Excellent Excellent Good Good Excellent Excellent Excellent Fair Excellent Excellent Fair Excellent...

13. Other Information: RoHS Compliant: VOC Compliant: MSDS Link, G5S-6 DeoxIT® Product Sheet: CAIG Essential Guide: WHY DeoxIT® is Different: 14. MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate. However, neither CAIG Laboratories, Inc., or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination with other products and substances...