DATA SHEETInfo DeoxIT® Fader F5 Spray, F-Series Moving Contact Lubricant for Conductive Plastic Faders & Controls 1. Part No.: F5S-H6 2. Container Size: 142 g (5.0 oz.) 3. Product Description: Precision lubricant for conductive plastics and carbon-based controls (faders, slide potentiometers, conductive membranes - mouse pads and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Use on conductive plastics and other sliding metal-plastic surfaces. Temperature range: -26OC to +150OC. 4. Features/Benefits: Spray, Low-Med-High Valve - Flushing action, Safe on plastics. DeoxIT® Fader F100L concentrate has approximately 0.0% chemical cleaning action. DeoxIT® Fader is not for metal contacts/connectors, use DeoxIT®, DeoxIT® Gold and DeoxIT® Shield for those surfaces. Replaces lubrication lost that have been cleaned with solvents or other cleaning solutions. Perfect for OEM’s Excellent enhancing, excellent protection, No ozone depletion. Reduces intermittent connections, arcing, RFI, wear and abrasion. Cleaner Audio - Clearer Video - Reliable Data. 5. Formulation: 5% DeoxIT® Fader F100L, F-Series 75% Odorless mineral spirits (CAS 64742-88-7) 20% DIFLUOROETHANE (CAS 75-37-6) 6. Which DeoxIT® product do I Use:  Use DeoxIT® Fader F-Series to lubricate and protect conductive plastic and carbon-based controls.  Use DeoxIT® D-Series contact treatment on surfaces that have been in service or have visual signs of oxidation. Contains 20% active deoxidizer.  Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active deoxidizer.  Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants, sulfur, etc.). Use on clean surface. Contains 0% active deoxidizer. Home of the DeoxIT® family of Environmentally-Safer Contact Cleaners and Connector Enhancing

7. Directions for Use: 1. Turn off, unplug the device. 2. DeoxIT® Fader F-Series is for conductive plastic materials; however, there may be metal materials involved with the contact or control. On these metal surfaces that have been in service or have visual signs of oxidation or corrosion pre-treat with DeoxIT® D-Series (D5S-6) contact treatment. See Data Sheet DS-D5S-6 and Audio/Video 9-1-1 Information Sheet (http://store.caig.com/s.nl/it.I/id.52/.f ). 3. Next, adjust valve (L-M-H) on the DeoxIT® Fader F5S-H6 and utilizing the extension straw, apply one short burst of DeoxIT® Fader onto the...

10. Materials Compatibility (Plastics, Rubber, Elastomeric and Metals): (Rating: Not compatible, Poor, Fair, Good, Excellent), (N/A = Not applicable (no solvents and propellants) (* If the product is not 100% DeoxIT® then the package is rated before and after the solvents/propellants are applied to materials. Compatibility testing is always recommended) Material Name Rating (*with solvents) ABS Nylon Lexan HDPE LDPE C.E.Phenolic Epoxy Polycarbonate PMMA POM PP PS PTFE PVC TPE/Rubber/Varnish Excellent Excellent Excellent Excellent Good Excellent Excellent Excellent Good Excellent Excellent Good...

13. Other Information: RoHS Compliant: VOC Compliant: MSDS Link, F5S-H6 DeoxIT® Product Sheet: CAIG Essential Guide: WHY DeoxIT® is Different: 14. MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate. However, neither CAIG Laboratories, Inc., or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination with other products and...