DeoxIT® D5 Spray, D-Series DATA SHEETInfo Contact Rejuvenator, Lubricant and Protectant 1. Part No.: D5S-6 (NSN 6850-01-435-6476) 2. Container Size: 142 g (5.0 oz.), with Perfect-StrawTM 3. Product Description: Unique contact treatment, rejuvenator, conductivity enhancer and lubricant. Removes oxidation and corrosion on metal surfaces. Fills in microscopic gaps and reseals surface for better contact to enhance flow of electricity. Chemically improves metal-to-metal connections and contacts. Improves connector performance/reliability. Temperature* range: -34 to +200OC. 4. Features/Benefits: 5% Spray, with Perfect-StrawTM - Flushing action, Safe on most plastics. DeoxIT® D100L concentrate has approximately 20% chemical deoxidizing action. Excellent deoxidizing, good protection, no ozone depletion. Improves conductivity and reduces intermittent connections. Reduces arcing, RFI, wear and abrasion. Cleaner Audio - Clearer Video - Reliable Data. 5. Formulation: 5% DeoxIT® D100L 75% Odorless mineral spirits (CAS 64742-88-7) 20% DIFLUOROETHANE (CAS 75-37-6) 6. Which DeoxIT® product do I Use:  Use DeoxIT® D-Series contact treatment on surfaces that have been in service or have visual signs of oxidation. Contains 20% active deoxidizer.  Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active deoxidizer.  Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants, sulfur, etc.). Use on clean surface. Contains 0% active deoxidizer. * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly r

7. Directions for Use: 1. Turn off, unplug the device. 2. Apply one short burst of DeoxIT® D-Series contact treatment to contact/connector surface. Operate the part/device to help break up oxides and contamination. Wait a few seconds, reapply one short burst. Wait two minutes before turning on equipment. Test for compatibility before use. 3. In extreme cases (severe oxidation or corrosion), you may need to leave DeoxIT® on overnight. If that is necessary; apply, then the following day remove any contaminants lifted by DeoxIT® with a lint free swab or cloth on accessible surfaces (If surface is...

10. Materials Compatibility (Plastics, Rubber, Elastomeric and Metals): (Rating: Not compatible, Poor, Fair, Good, Excellent), (N/A = Not applicable (no solvents and propellants) (* If the product is not 100% DeoxIT® then the package is rated before and after the solvents/propellants are applied to materials. Compatibility testing is always recommended) Material Name Rating (*with solvents) ABS Nylon Lexan HDPE LDPE C.E.Phenolic Epoxy Polycarbonate PMMA POM PP PS PTFE PVC TPE/Rubber/Varnish Excellent Excellent Excellent Good Good Excellent Excellent Excellent Fair Excellent Excellent Fair Excellent...

13. Other Information: RoHS Compliant: VOC Compliant: MSDS Link, D5S-6 DeoxIT® Product Sheet: CAIG Essential Guide: WHY DeoxIT® is Different: 14. MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate. However, neither CAIG Laboratories, Inc., or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination with other products and substances...