INDUSTRIAL GAS HANDLING EQUIPMENT

Product catalog summary

Overview: This document outlines the specifications and operational guidelines for industrial gas handling equipment, focusing on pipeline equipment for non-corrosive gases such as O2, C2H2, NH3, propane, and cryogenic gases.

Specifications:

Inlet Pressure: Varies by gas type, with non-corrosive gases and O2 at 200 or 300 bar, acetylene at 20 bar, ammonia at 10 bar, propane at 8 bar, and cryogenic gases at 10 bar.
Outlet Pressure: Ranges from 0 to 70 bar for non-corrosive gases and O2, with specific ranges for other gases.
Flowmeters: Induflow and Dynaflow types with specific inlet pressures and flow rates.
HP Flexible Hoses: Made from materials like PTFE and stainless steel, with working pressures of 200 or 300 bar and burst pressure over 1500 bar.
Safety Valves: Set pressure range from 0.5 to 500 bar, with instantaneous switch capabilities.

Equipment and Accessories:

Panel-Mount Shut-Off Valve: Type SMC with a max inlet pressure of 15 bar and flow max of 20 Nm3/h.
Dual Line Regulators: Assembly D300/D800 with adjustable outlet pressure and specific flow rates.
Heaters: Installed to prevent freezing, with power options of 500 W or 1000 W.
Manifolds: Semi-automatic switchover manifold for uninterrupted gas supply, equipped with safety and purge valves.

High Pressure Regulators: Various types with specific inlet and outlet pressures, flow rates, and applications, including high precision and high flow options.

Low Pressure Regulators: Includes the "BP-ICE" range approved for low temperatures and tested for 100,000 cycles.

Installation Options: Equipment can be installed on walls or floors, with connections from bundles to pipelines.

Contact Information: Cahouet, located in Montreuil, France, provides contact details for further inquiries.

Catalog excerpts

INDUSTRIAL GAS HANDLING EQUIPMENT

Open the catalog to page 1

MANIFOLDS PIPELINE ACCESSORIES The Cahouet semi automatic switchover manifold secures a highly reliable uninterrupted gas supply. Changeover to reserve bank is fully automatic. Simply reset cylinder/bundle bank priority by manual lever operation after replacement of the empty pack. Perfect outlet pressure stability is guaranteed with our high quality BP line regulator. Manifold fitted with safety relief valve and purge valve. IMPORTANT: “No down-time maintenance manifold” equipped with check-valves on each bank. Maintenance of one regulator is possible while the second regulator is still working....

Open the catalog to page 2

HIGH PRESSURE REGULATORS Type

Open the catalog to page 3

“BP-ICE” Low temperature line regulator range Approved for -40°C +60°C service 100 000 cycles tested S2V and High Pressure Stand Connection from bundle to pipeline including High Pressure Valve ◄ Wall installation Floor installation ► 52 rue de Lagny 93100 MONTREUIL - FRANCE E-mail : [email protected]

Open the catalog to page 4

INDUSTRIAL GAS HANDLING EQUIPMENT

INDUSTRIAL GAS HANDLING EQUIPMENT

Catalog excerpts

All Cahouet catalogs and technical brochures