QU IC KFI R E HEAT FROM PRUNINGS Automatic de-ashing for top burning of wood and biomass pellets The QUICKFIRE stoves have been developed to work also with biomass pellets from prunings and trimmings, which are naturally rich in ash. An easy pre-set selector allows to chose the type of pellets to burn, whether it is standard pellets (beech, fir) or pellets from prunings. All of our QUICKFIRE pellet stoves are equipped with automatic de-ashing, that allows to automatically clean the burner by making ash fall into the ash tray underneath. Before falling into the tray, ash is pressed along the burner sides so that it takes up less space in the ash tray. The automatic de-ashing makes it possible to remove the ash from the burner without switching off the stove. The QUICKFIRE stoves can heat between 80 and 500 m³. Thanks to the new QUICKFIRE line, CAEB offers a complete range of machineries for collecting, transforming and valuing wood biomass from prunings and trimmings. QUICKFIRE HYDRO PELLET C QUICKFIRE HYDRO PELLET CAEB INTERNATIONAL srl via Botta Bassa, 22 - 24010 Petosino di Sorisole (BG) - Italy tel. +39 035 570451 - fax +39 035 4129105 - [email protected] - www.caebinternational.it

QUICKFIRE HYDRO PELLET 22 kW Pellet thermo-stove for powering the heating system and producing domestic hot water for all uses* Fuel pellet Ø 6 mm Smoke extraction duct Ø 100 mm Power supply 230 V/50 Hz Average power consumption 420 W (during the ignition phase) 160 W (during the ordinary operation) Dimensions (mm) L x W x H 617 x 559 x 1,234 Weight 190 kg Tank capacity approx. 42 kg pellet Approx. heating capacity** 500 m³ Rated power P. max 21 kW - P. min 5 kW Water heating power P. max 17 kW - P. min 3 kW Air heating power P. max 4.2 kW - P. min 2.5 kW Pellet consumption P. max 4.7 kg/h -...