PG4i / STAND-ALONE RAIN GAUGE
4Pages

PG4i STAND-ALONE RAIN GAUGE Your professional all in one rain measurement system PG4i is a stand-alone rain gauge that does not require connection to a datalogger. Due to the built-in 3G mobile modem, it can measure, locally record and automatically send to a FTP server all data pertaining to the overall precipitation as well as its intensity per minute. Due to the low consumption, the standard batteries that supply power ensure operation without interruptions for very long periods of time, while simplifying the installation as much as possible. It is a particularly accurate rain gauge capable of indicating possible malfunctions before they cause the measurements to stop, therefore it is particularly easy to maintain. The sensor has a captation surface of 400 cm2. EASE OF USE After receiving the PG4i stand-alone rain gauge, just register it on the http://support.cae.it web site and insert the batteries , in order to start receiving data. Register your product Power it up Enjoy your data

CUSTOMISATION The configura on can be performed remotly via web or locally, by physically connec ng to the PG4i and using the configura on so ware that is freely available. What can you customise? 1) FTP service, data display By default, data are sent to a FTP server provided by CAE, which allows displaying them through AEGIS, a 2D and 3D web so ware that can show the posi on of the rain gauge on a map, as well as the data sent by the rain gauge both as a chart and as a table. As an op on, the user can set its own FTP server as des na on for the data. Finally, it’s possible to receive data...

Power supply The PG4i rain gauge is designed to be powered by 3.6 V lithium batteries for professional use, available in various on-line sites. The rain gauge can ensure a long duration of its batteries without requiring solar panels or mains power supply (220V). However, if the client prefers, the rain gauge is also compatible with power supply via a normal 12 V battery that in turns can be connected to a solar panel system or to the mains power. EASE OF MAINTENANCE AND "ZERO BREAKDOWN TECHNOLOGY" Thanks to the tipping technology, the PG4i rain gauge empties itself and requires very little...

RESPONSE PRECISION AND SPEED PG4i measures liquid precipita on with a resolu on of 0.1 mm. The maximum error is <3% up to 250 mm/h, cer fiable in class A according to the criteria of the UNI 11452: 2012 standard. Overcoming one of the limita ons of weight-based rain gauges, PG4i measures with this degree of accuracy from the first minute following the phenomenon detected, thus being par cularly suitable for the mely measurement of downpours. THE UNI 11452:2012 STANDARD In July 2012 the UNI 11452:2012 standard was approved as part of the na onal standards, regula ng the metrological...