Technical Data and Specifications
The X2-100 pump is designed for various applications, with materials selected based on the corrosiveness of the liquids being pumped. For non-corrosive liquids, components like the pump casing, suction cover, and impeller are made from grey cast iron GJL250. For lightly and highly corrosive liquids, materials such as bronze and stainless steel are used.

Materials
- Pump Casing and Suction Cover: Grey cast iron GJL250 or Bronze
- Clapet Valve: Natural rubber
- Impeller: Grey cast iron GJL250 or Bronze
- Shaft: Steel C40 or Stainless steel (Aisi 304/316)
- Mechanical Seal: Various combinations including Carbon/S.S.304/NBR and Widia/S.S.316/Viton

Dimensions
The pump has specific dimensions and weights, with a total weight of 14 kg. Key dimensions include:
- A: 85 mm
- B: 237 mm
- H1: 115 mm
- H2: 165 mm
- H3: 268 mm

Performance
The pump operates at different RPMs (2900, 3000, 3400, 3600) with varying flow rates and head measurements. For example, at 2900 RPM, the flow rate ranges from 0 to 36 m3/h with corresponding head (H-m) from 14 to 3 meters and power (kW) from 0.75 to 1.

Pump Characteristics
The pump features a free passage of 20x17 mm, an impeller diameter of 109 mm, and both inlet and outlet diameters of 2 inches.

Additional Information
Arca Pumps & Energy S.r.l. reserves the right to change any feature without notice. For more information, contact them at their Montecavolo, Italy office or visit their website.