XCSA120BC

Product catalog summary

Product Overview
The CSA120BC is a DC/DC converter designed to convert 12Vdc input to a 24Vdc output with a continuous current of 5A. It is suitable for applications requiring stable voltage conversion with protection features.

Input Technical Data

Rated Voltage: 12 Vdc
Voltage Range: 10.5 to 18 Vdc
Current Consumption: 10 A (12 Vdc) ±10%
Inrush Peak Current: 60 A
Internal Protection Fuse: T 20 A
External Protection: MT: C-25 A / Fuse: T-25 A

Output Technical Data

Voltage Range: 24 Vdc (adjustable from 22.5 to 27.5 Vdc)
Continuous Current: 5 A
Overload Limiting: 6.5 A
Short Circuit Peak Current: 12 A for 300 ms
Ripple: 100 mVpp
Hold Up Time: 1 ms
Status Indication: LED "DC OK"
Parallel Connection: Possible, with redundant connection using external ORing diode

General Technical Data

Efficiency: 83% (12 Vdc)
Dissipated Power: 25 W (12 Vdc)
Operating Temperature Range: –20 to +50°C
Isolation: Input/Output 2.1 kVdc, Input/Ground 1.41 kVdc, Output/Ground 0.75 kVdc
Safety Standard: EN 60950-1
EMC Standards: EN 61000-6-2, EN 61000-6-3
Overvoltage Category/Pollution Degree: II/2
Protection Degree: IP 20
Connection Terminal: 2.5 mm²
Housing Material: Aluminium
Dimensions: 40x115x130 mm
Weight: 550 g
Mounting: Vertical on a rail, 10 mm from adjacent components

Accessories

Mounting Rails: Various options available under IEC60715 standards

Approvals and Markings

DC wide range input
Protections: Short circuit, overload, input/output overvoltage, over temperature
Compact dimensions

Additional Notes

Refer to the datasheet for more details.
Protection starts cycling in ON/OFF mode above overcurrent limit.
Inrush current varies with internal impedance and connection resistance.
Isolation tests require DC due to phase-neutral capacitors.

Catalog excerpts

XCSA120BC DC/DC converter 12Vdc/ 24Vdc 5A Code Type HS code INPUT TECHNICAL DATA Input rated voltage Input voltage DC Current consumption Inrush peak current Internal protection fuse External protection on AC line MT: C-25 A / Fuse: T-25 A OUTPUT TECHNICAL DATA Output voltage range Output adjustable range Continuous current Overload limiting Short circuit peak current Ripple @ nominal ratings 100 mVpp Parallel connection possible Redundant parallel connection possible with external ORing diode GENERAL TECHNICAL DATA Operating temperature range Input / output isolation Input / ground isolation Output / ground isolation Safety Standard EMC Standard Overvoltage category / pollution degree Protection degree Connection terminal vertical on a rail, 10 mm from adjacent components Housing material Dimensions (LxHxD) Approximate weight Mounting information * DC wide range input * Short circuit, overload, input and output overvoltage protections * Over temperature protection * Compact dimension Copyright © Cabur srl Sede legale Localita isola Grande, 45 - 17041 Altare (SV) - Italia - Tel. 019-589991 - Fax 019-58999233 - E-mail: [email protected] 1 Please refer to the datasheet for more details Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance Inrush current measured at Un with battery power supply; peak current varies according to the internal impedance of the current source and the resistance of the connections. The capacitors between phase and neutral, requires that the isolation tests are carried out in DC

Open the catalog to page 1