
• cabur CONNECTING ENERGY SINCE 1952
Open the catalog to page 1CONNECTING ENERGY SINCE 1952
Open the catalog to page 3WARNING If not specified, the technical data in this catalogue are typical and measured at 25°C (77°F), 230 Vac, Unom, Vdc and rated current; ripple is measured at 20 MHz with probe connected to 0.1 μF. The technical data in this catalogue are typical and are not binding for Cabur and may be modified without prior notice, simply for production or improvement and/or evolution reason. Please contact our technical-commercial offices for any relevant confirmation or updates. For more informations visit our web site www.cabur.eu.
Open the catalog to page 4CABUR SINCE 1952 The wide and diversified offer guarantees a level of flexibility and unique ability to find solutions tailored to specific needs, which enables us to respond to the most varied and complex installation needs. The Company Founded in Italy in 1952, Cabur quickly conquered the role of leader amongst the national manufacturers of terminal blocks for electrical panels, always paying particular attention to the needs of installers and to cutting-edge technological solutions. Always oriented towards the improvement of its products, in recent years Cabur has responded to the Industry...
Open the catalog to page 5CONNECTING ENERGY SINCE 1952 DIN rail power supplies Uninterruptible power supplies
Open the catalog to page 9CABUR POWER HOUSE Cabur continues to renew and expand its range of power supplies for use in industrial automation and control of processes and systems, improving product performance and technology to meet the needs created by the continuing changes in applications and regulations. ELECTRONIC OVERLOAD POWER SUPPLY PROTECTION CAN BE OBTAINED USING VARIOUS TECHNIQUES: – switch off the output as soon as possible: this is cost effective but doesn’t allow for either start up of heavy loads nor for protection selectivity for various loads. – constant power protection: if the allowed overload is sufficiently...
Open the catalog to page 10PARALLEL AND REDUNDANT PARALLEL CONNECTION: all Cabur power supplies can be connected in parallel to combine the power of two or more power supplies. In addition, models that already include an output separation diode (ORing diode) are available for use with redundant parallels (please see the related item in the catalogue). We recommend adjusting the outputs of all the power supply units to the same voltage (tolerance ± 50 mV), applying the same calibration load, before connecting them in parallel. We also recommend using power supply units of the same model. If it is necessary to connect two...
Open the catalog to page 11MODULAR SWITCHING POWER SUPPLIES cabur Single-phase switching power supply with power up to 70W for use in civil and industrial automation applications. The technical and design characteristics of the housing, with standard modular DIN measurements for installation in control units were planned to optimise use in home automation. The performance level and compact size also make it an excellent solution for electrical panels and shallow containers. High output and a contained working temperature support energy savings and longer component life. Suggested uses • Industrial automation applications...
Open the catalog to page 14SINGLE PHASE POWER SUPPLIES DOMOTIC POWER LINE cabur Single phase and DC input Short circuit, overload and input overvoltage Over temperature protection Suitable for standard applications Isolation Class 2, no grounding needed Please refer to the datasheet for more details Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance Current consumption Inrush peak current Power factor Internal protection fuse possible with external ORing diode Dissipated power Operating temperature range Input / output isolation...
Open the catalog to page 15POWER SINGLE PHASE POWER SUPPLIES DOMOTIC POWER LINE Single phase and DC input Short circuit, overload and input overvoltage Over temperature protection Suitable for standard applications Isolation Class 2, no grounding needed Please refer to the datasheet for more details Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance Current consumption Inrush peak current Power factor Internal protection fuse possible with external ORing diode Dissipated power Operating temperature range Input / output isolation...
Open the catalog to page 16SINGLE PHASE POWER SUPPLIES DOMOTIC POWER LINE cabur • Single phase and DC input • Short circuit, overload and input overvoltage protection • Over temperature protection • Suitable for standard applications • Isolation Class 2, no grounding needed Input voltage DC 100.370 Vdc (derating Uin<130 Vdc) Inrush peak current 15 A Internal protection fuse T 2 A Dissipated power Operating temperature range Input / output isolation Input / ground isolation Output / ground isolation Standard / approvals EMC Standard Overvoltage category / pollution degree Protection degree Connection terminal Housing material...
Open the catalog to page 17SINGLE PHASE POWER SUPPLIES DOMOTIC POWER LINE Single phase and DC input Short circuit, overload and input overvoltage Over temperature protection Suitable for standard applications Isolation Class 2, no grounding needed Please refer to the datasheet for more details Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance Current consumption Inrush peak current Power factor Internal protection fuse possible with external ORing diode Dissipated power Operating temperature range Input / output isolation...
Open the catalog to page 18SWITCH MODE POWER SUPPLY COOL POWER LINE cabur Single-phase switching power supply with DIN-rail, designed specifically for applications in command and control panels for industrial automation and process control. Capable of delivering +60% to +80% nominal current for a prolonged period of time while maintaining a constant output voltage and equipped with a voltage threshold-controlled failure contact which is triggered when the voltage drops below 90% of the rated value. With these features and numerous international certifications, this range of power supplies enables designers to meet the...
Open the catalog to page 1912 Pages
228 Pages
104 Pages
80 Pages