Catalogs >
CABLESCOM >
EE2205C

EE2205C
2Pages

Catalog excerpts

STANDARDS Mechanical measuring methods: IEC 60794-1 Methods of measuring optical fiber: IEC 60793-1 DESCRIPTION AND APPLICATION Central Loose Tube cables up to 24 optical fibres, reinforced. Protected by an armour of corrugated steel tape and a double black polyethylene sheath UV resistant. The recommended installation of the FvPSP cable is in underground ducts by pulling techniques with a maximum installation load of 2.0 kN. CONSTRUCTION • Loose tube: PBT Central Loose Tube filled with thixotropic compound, containing up to 24 optical fibers Colour coding of tubes and fibres according to table 1. • Mechanical reinforcement: Traction resistant Waterblocking fibreglass yarns to avoid water penetration and make the cable waterproof. • Inner sheath: Black PE. • Armour: Corrugated longitudinal annealed steel tape. • Outer sheath: Black coloured PE, UV resistant. • Sheath marking: The cables will be marked at regular intervals with the following information: o Manufacturer / Year/ Model / Nr Fibers / Fiber type / Length marking (m) o Other marks are available upon reques OPTICAL FIBRE CHARACTERISTICS The parameters of the optical fiber used in these cables meet the specific fiber datasheet parameters. See our fibre product for the characteristics of the fibre. However, in case singlemode G.652D fiber is used, optical transmission parameters are as follows:. Optical transmission characteristics of cabled fibre ; Attenuation coefficient: Average/ maximum at 1310 nm: 0,36 / 0,38 dB/km Average / Maximum at 1550 nm: 0,22 / 0,25 dB/km PMD < 0,20 ps/km1/2 PMD link < 0,10 ps/km1 2 All drawings, designs, specifications and particulars of weights, dimensions, etc. in this documentation are only indicative and must not be considered contractual. Cables de Comunicaciones Zaragoza, SL. Poligono de Malpica, calle D, n° 83. 50016 Zaragoza - Espafia +34 976 729 900 | +34 976 729 974 www.cablescom.com | comercial@cablescom.com Certified Company ISO 9001 - ISO 14001

Open the catalog to page 1

Fibre Colour Abrev. Brown Orange White Black Turquoise Pink Fibre Colour Abrev. (*): The fibers from13 to 24 will be marked with black rings spaced 50 mm between them. MECHANICAL CHARACTERISTICS Method Test conditions Installation Tensile strength (Aa = 0,33dB) IEC 60794-1 Met E1A 2.000 N Permanent Tensile strength (Aa = 0,05dB) IEC 60794-1 Met E1A 1.250 N Impact resistance (Aa < 0.05 dB) IEC 60794-1 Met E4 5 J / radio 300mm Bending radius (Aa < 0.05 dB) IEC 60794-1 Met E11 r = 20 x cable diamenter Water penetration IEC 60794-1 Met F5B LPwater < 3 m (24 hours) Nr. fibres Diameter (mm)...

Open the catalog to page 2

EE2205C 2Pages

Catalog excerpts

All CABLESCOM catalogs and technical brochures

EE2205C
2Pages