Catalogs >
CABLESCOM >
EB116B0

EB116B0
4Pages

Catalog excerpts

(PVC / ISCR / OSCR / PVC / SWA / PVC) RE-Y(St)YSWAY -p/tIMF -fl STANDARDS BS/PAS 5308 Part 2 Type 2. DESCRIPTION AND APPLICATION Used for transmission of analogue and digital signals in Instrumentation and control systems. Allowed for use in zone 1 and zone 2 group II classified areas (acc. to IEC 6007914); not allowed for direct connection to low impedance source (i.e. the public mains electricity supply). Individually screened elements for improved EM protection between pars/triads. Recommended for outdoor installation, on racks, trays, in conduits, in dry and wet locations, for direct burial. CONSTRUCTION • Conductors: Solid (Class 1), stranded (Class 2) or flexible (Class 5) Annealed Copper, acc. to IEC 60228. • Insulation: PVC grade TI51, acc to EN 50590-2-21 • Cabling elements: Pairs or Triads. • Core Identification: Numbered tapes applied over screened element. • Individual screen: 0,50 sqmm. tinned cooper drain wire under and in contact with aluminium/PETP laminated tape applied metallic side down. Numbered PETP tape applied over each individually screened pair. • Core. Units are assembled together using the reciprocating lay technique. • Core wrapping. PETP tape • Collective screen. 0,50 sqmm. tinned cooper drain wire under and in contact with aluminium/PETP laminated tape applied metallic side down. • Inner Sheath: PVC, acc. to EN 50290-2-22, type TM51. Blue or Black. • Armour: Single layer of Galvanized Steel Wire Armouring (GSWA), applied spirally over the PVC bedding. Wire diameter acc. to BS/PAS5308 app D. • Outer Sheath: PVC, acc. to EN 50290-2-22, type TM51. Blue or Black • Sheath marking : The outer sheath shall be marked in white ink, at regular intervals, with the following information: o Name of manufacturer/ Year/ Length marks o Other type of marks according to the costumer All drawings, designs, specifications and particulars of weights, dimensions, etc. in this documentation are only indicative and must not be considered contractual. Cables de Comunicaciones Zaragoza, SL. Poligono de Malpica, calle D, n° 83. 50016 Zaragoza - Espafia +34 976 729 900 | +34 976 729 974 www.cablescom.com | comercial@cablescom.com Certified Company ISO 9001 - ISO 14001

Open the catalog to page 1

(PVC / ISCR / OSCR / PVC / SWA / PVC) RE-Y(St)YSWAY -p/tIMF -fl Copper Conductor (Nr. Wires/ Wire Diam.) 1/0,8 16/0,20 24/0,20 1/1,13 7/0,52 7/0,67 Minimum Insulation Resistance (MOxkm, 20°C, 500 Vdc). Part 2 Mutual Capacitance (nF/km, 800 Hz). Max. For ISCR cables Inductance to Resistance Ratio (L/R) (mH/O). Max._ Operating voltage (V.) Test Voltage (Vac./ Vcc., 1 min) MECHANICAL CHARACTERISTICS Operating Temperature (°C) Installation Temperature (°C) Bend radius (mm.) (Type 1 / Type 2) PVC IOL. Minimum. (%) PVC HCL. Maximum. (%)_ Flame Propagation Fire properties 1 For paired conductors,...

Open the catalog to page 2

(PVC / ISCR / OSCR / PVC / SWA / PVC) RE-Y(St)YSWAY -p/tIMF -fl Pair Diam. Nr under Overall Nominal Diam. Weight Overall Diam. Nominal Std Weight Delivery Drum type Pair Diam. Nr. under Diam. Weight Delivery Drum type Overall Diam. Nominal Std Weight Delivery Drum type All drawings, designs, specifications and particulars of weights, dimensions, etc. in this documentation are only indicative and must not be considered contractual. Cables de Comunicaciones Zaragoza, SL. Poh'gono de Malpica, calle D, n° 83. 50016 Zaragoza - Espana Certified Company ISO 9001 - ISO 14001 ZARAGOZA Page 3/4

Open the catalog to page 3

(PVC / ISCR / OSCR / PVC / SWA / PVC) RE-Y(St)YSWAY -p/tIMF -fl Pair Diam. Nr. under Diam. Weight Delivery Drum type Diam. Weight Delivery Drum type Overall Diam. Nominal Std Weight Delivery Overall Diam. Nominal Std Weight Delivery Drum type Cables de Comunicaciones Zaragoza, SL. Poh'gono de Malpica, calle D, n° 83. 50016 Zaragoza - Espana Certified Company ISO 9001 - ISO 14001 ZARAGOZA Page 4/4

Open the catalog to page 4

EB116B0 4Pages

Catalog excerpts

All CABLESCOM catalogs and technical brochures

EB116B0
4Pages