Catalogs >
CABLESCOM >
EA4Y1CF

EA4Y1CF
2Pages

Catalog excerpts

PVC INSULATED MULTIPAIR LIGHT CURRENT CONTROL CABLES TO ENA TS 09-6 -SHIELDED AND ARMOURED, GENERATION |\| ROHS Rodent impact ROHS resistant resistant compliant STANDARDS ENA TS 09-6 issue 8 2012 / BS 7870-8-4: 2003 Flame propagation: BS EN 50265-2-1 and BS 7870-2 DESCRIPTION AND APPLICATION Cables from 2 to 200 pairs with 0.8 mm copper conductors.PVC insulation, twisted into pairs, stranded in layers or units. Collective screen of aluminium tape, bedding of PVC, steel wires or steel tapes armouring and external black PVC sheath. These cables are primarily intended for use indoors or outdoors for fixed installations on walls and metallic structures. They may be used where there is a high risk of fire propagation along cable runs, especially where cabling density is high. They operate at tensions up to 110 Vac or 150 Vdc but should not be used for direct connection to low impedance sources, e.g. public mains electricity supply. CONSTRUCTION • Conductors: Annealed cooper single strand of 0.80 mm nominal diameter. • Insulation: PVC type TI X. Nominal thickness 0.3 mm. • Cabling elements: Colour coded pairs as per BS 7870-4 table 1. • Lay-up: 2-pair cable shall be laid-up as a quad. 5-pair and 10-pair cables shall be laid up to form a compact and symmetrical cable. 20-pair to 200-pair cables shall be constructed from the required number of cabling units. Unit identification by numbered tapes. • Core wrapping. Plastic tape, longitudinally applied with overlap. • Collective screen: Longitudinal 0,15 mm thick aluminium screen with a backing adhered to the bedding and a 0.8 mm tinned copper drain wire. • Bedding: PVC compound type TI 1, conforming to the requirements of BS 7655 3.1. Thickness as per ENA TS 09-06 table E3(c). • Armour: Cables up to 10 pairs are armoured with a single layer of galvanized steel wires helically applied. Cables from 20 pairs are armoured with a double layer of galvanized steel tapes. • Outer sheath: Black PVC compound type TM 1 to BS 7655-4-1. Thickness as per ENA TS 09-06 table E3(c). • Sheath marking : The outer sheath shall be embossed, at regular intervals of about 500 mm, in one line (cables with d<15 mm) or two lines (cables with d>15 mm) with the following legend: o ELECTRIC CABLE -100 V - BS 7870-8-4 - CABLESCOM - (year of manufacture) Length markings in white ink can also be printed at the option of the client o Other type of markings is also possible according to the customer. All drawings, designs, specifications and particulars of weights, dimensions, etc. in this documentation are only indicative and must not be considered contractual. Cables de Comunicaciones Zaragoza, SL. Poligono de Malpica, calle D, n° 83. 50016 Zaragoza - Espafia

Open the catalog to page 1

Maximum loop Resistance (Q/km) 73.6 Minimum insulation resistance (20°C, 500 V, MQxkm) • Between conductors 80 • Between the shield and the armour 1 Maximum mutual capacitance (nF/km, 100 Hz) 150 Maximum capacitance unbalance (pF/500m, 1000 Hz) • 2-pair cable 800 • Above 2-pairs. Any pair combination 400 Dielectric strength (Vdc, 1 min) • Pair to pair and pairs to screen 3000 MECHANICAL CHARACTERISTICS Temperature range: from -20° C to +70° C Bending radius: 15 x Rcabie steel wires diam (mm) steel Cable Aprox. , , All drawings, designs, specifications and particulars of weights, dimensions,...

Open the catalog to page 2

EA4Y1CF 2Pages

Catalog excerpts

All CABLESCOM catalogs and technical brochures

EA4Y1CF
2Pages