Catalogs >
CABLESCOM >
EA4Y1CE

EA4Y1CE
2Pages

Catalog excerpts

PVC INSULATED MULTIPAIR LIGHT CURRENT CONTROL CABLES TO ENA TS 09-6 UNSCREENED - SWA ARMOUREdI |\| ROHS Rodent impact ROHS resistant resistant compliant STANDARDS ENA TS 09-6 issue 8 2012 / BS 7870-8-4: 2003 Flame propagation: BS EN 50265-2-1 and BS 7870-2 DESCRIPTION AND APPLICATION Cables from 2 to 200 pairs with 1/0.8 mm copper conductors. PVC insulation, twisted into pairs, stranded in layers or units. Bedding of PVC, steel wires armouring and external black PVC sheath. These cables are primarily intended for use indoors or outdoors for fixed installations on walls and metallic structures. They may be used where there is a high risk of fire propagation along cable runs, especially where cabling density is high. They operate at tensions up to 110 Vac or 150 Vdc but should not be used for direct connection to low impedance sources, e.g. public mains electricity supply. CONSTRUCTION • Conductors: Annealed cooper single strand of 0.80 mm nominal diameter. • Insulation: PVC type TI X. Nominal thickness 0.3 mm. • Cabling elements: Pairs. • Lay-up: 2-pair cable shall be laid-up as a quad. 5-pair and 10-pair cables shall be laid up to form a compact and symmetrical cable. 20-pair to 200-pair cables shall be constructed from the required number of cabling units. Pair identification as per BS 7870-4. • Core wrapping. Plastic tape, longitudinally applied with overlap. • Bedding: PVC compound type TI 1, conforming to the requirements of BS 7655 3.1. • Armour: galvanized steel wires helically applied. • Outer sheath: Black PVC compound type TM 1 to BS 7655-4-1. • Sheath marking : The outer sheath shall be embossed, at regular intervals of about 500 mm, in one line (cables with d<15 mm) or two lines (cables with d>15 mm) with the following legend: o ELECTRIC CABLE -100 V - BS 7870-8-4 - CABLESCOM - (year of manufacture) Length markings in white ink can also be printed at the option of the client o Other type of markings is also possible according to the customer. All drawings, designs, specifications and particulars of weights, dimensions, etc. in this documentation are only indicative and must not be considered contractual. Cables de Comunicaciones Zaragoza, SL. Poligono de Malpica, calle D, n° 83. 50016 Zaragoza - Espafia +34 976 729 900 | +34 976 729 974 www.cablescom.com | comercial@cablescom.com Certified Company ISO 9001 - ISO 14001

Open the catalog to page 1

Maximum loop Resistance (Q/km) 73.6 Minimum insulation resistance (20°C, 500 V, MQxkm) • Between conductors 80 • Between the shield and the armour 1 Maximum mutual capacitance (nF/km, 100 Hz) 150 Maximum capacitance unbalance (pF/500m, 1000 Hz) • 2-pair cable 800 • Above 2-pairs. Any pair combination 400 Maximum mutual inductance (pH/500 m, 1000 Hz) 915 Dielectric strength (Vdc, 1 min) • Pair to pair and pairs to armour 3000 MECHANICAL CHARACTERISTICS Temperature range: from -20° C to +70° C Installation temperature: 5°C to 50°C Bending radius: 15 x Rcabie SWA No. wire Pairs Diam. (mm)...

Open the catalog to page 2

EA4Y1CE 2Pages

Catalog excerpts

All CABLESCOM catalogs and technical brochures

EA4Y1CE
2Pages