Vertical Gear Shifter – 918 Series Industrial VGS Systems Based on the proven quality and performance of Cablecraft® low friction control cables, our manual transmission shifter system provides a maintenance-free, cost-effective approach that makes remote shifting easier to build and use. Common Applications: Dash or center console mounted shifter, small commercial vehicles, servo assisted transmission – bus and coach applications, light plant and agricultural vehicles, low to medium duty cable applications • • • • • • • • • • Easy installation, adjustment free Maintenance-free life Ends gear jump out Clean precise shifts No knob-to-cab relative movement in floating cabs No action required to tilt cab Vibration from drive train is not transmitted Reduced cab noise levels Installation design to customer requirements Flexible capability with different cable end fittings

Vertical Gear Shifter – 918 Series Technical Data • Recommended handle lengths: 160mm to 220mm (6-¼” - 8-¼” approx.) • Normal working load @ knob = 3 kg (6.6 lb.) to 5 kg (11 lb.) • Accidental overload @ knob = 100kg (220 lb.) • Operating temperatures: -40°C to 120°C (-40°F to 248°F) • Weight: 1.1kg (2.4 lb.) 110 SELECT MOVEMENT SHIFT MOVEMENT 30° 2110 Summit Street New Haven, Indiana USA 46774 Tel 260 749-5105 Fax 260 749-5677 2789 Old Belleville Road St. Matthews, South Carolina USA 29135 Tel 803 655-7300 Fax 803 874-3558 4401 South Orchard Street Tacoma, Washington USA 98466 Tel 253 475-1080...