Unidrum Lever Description: Unidrum Lever Industrial Push-Pull and Pull-Only Hand Control Push-Pull and Pull-Only Hand Control Applications: • Medium to light duty throttle compactors • Valve dump control jackhammers • Hydraulic valve control concrete cutters • Backhoe throttle Features: • Adjustable friction lock • 5 to 1 mechanical advantage • Adjustable mechanical stops Other Related Products: • All other hand levers Hand Control Industrial A control head designed primarily for hand throttle applications on commercial and industrial vehicles, and also suitable for many other uses. Compact and efficient for imparting light-to-medium pull-only or push-pull loads through flexible conduits and innermembers. Unidrum controls hold and operate up to 26lb push-pull or pull-only output loads. Mechanical advantage at knob is 5 to 1. There is a self locking nut for operator adjustment of friction setting. The adjustable stop plates allow 10° (3/16" linear output) incremental travel adjustment. Two inches of cable travel requires approximately 90° lever travel. Three inches of cable requires approximately 135° lever travel. The lever position is adjustable in 60° increments to provide optimum operating range. Optional cable entry offers four mountings/directions of operation alternatives. Also available with a smaller handle for light duty applications or with a locking handle. Linking Motion & Control... The Ca

Unidrum Lever • Hold and operate up to 25lb push-pull or pull-only output load. Mechanical advantage at knob is 5/1. • Self-locking nut for operator adjustment of friction setting. • Adjustable stop plates allow 10° incremental travel adjustment. • Lever position is adjustable in 60° increments. • Four optional cable entry alternatives. • Rugged diecast zinc alloy material. • Mount with (4) 3/16" screws or bolts. CABLE PUSHES CABLE PULLS ADJUSTABLE FRICTION LOCK ADJUSTABLE STOP TABS ADJUSTABLE LEVER POSITION BASIC OPTIONAL CABLE MOUNTING POSITIONS CH220 (Miniature) MAX CABLE TRAVEL 92MM = 315°...

• Hold and operate up to 26lb push-pull or pull-only output load. Mechanical advantage at knob is 5/1. • Self-locking nut for operator adjustment of friction setting. • Adjustable stop plates allow 10° (.2 linear output) incremental travel adjustment. 2" of cable travel requires approximately 90° lever travel. • Optional cable entry. • Rugged diecast zinc alloy material. ^ Threaded Swivel Dimension A Per Stroke (extended) 2" 6.94" 3" 8.94" [3 Grooved Swivel Dimension A Per Stroke (extended) 2" 6.25" 3" 8.25" SLIDING POSITIVE LOCK. LOCATION HOLES IN BACK PLATE TO SUIT CUSTOMER REQUIREMENTS. ADJUSTABLE...

Lever Order Code Material * Zinc Based Die-Cast Body, Drum and Lever * Internal Long Life Nylon Bearings * Optional Black Powder Coat Paint Finish Cablecraft® Ordering Codes Basic Unidrum Lever — Knob Color- Cable Exit Position (see illustration) 1 Lower Mount, Left Exit 2 Lower Mount, Right Exit 3 Upper Mount, Left Exit 4 Upper Mount, Right Exit Output End Configuration, Cable Size & Type Style 1 Threaded Swivel 2 Grooved Swivel 3 Threaded Swivel 4 Grooved Swivel 5 Threaded Cap 6 Grooved Cap Size Type Travel (inches) Cable Lever Overall Length (inches) Replacement Cables Part Number Duty A17X-330 LD...