Throttle Pedal – Heavy Duty Foot Control Heavy-Duty Throttle Pedals are available in two configurations: 001 – Foot throttle only design 002 – Adds hardware allowing for a manual remote hand operated throttle control Commons Applications: Medium and heavy-duty trucks, construction and farm equipment, buses • Torsion spring is incorporated for idle position return • Environmental contamination is minimized by a plastic boot installed between the pedal and mounting base • Idle pedal position and throttle travel is adjustable to meet user requirements • Entire lower portion of assembly can be inserted through a cutout in the floor, and will rotate 360° and down 30° maximum from horizontal to optimize throttle cable routing • Multiple fastener holes incorporated into the base to accommodate different mounting patterns • Pedal surface is ribbed to reduce foot slippage, and increase strength Material: • Corrosion-resistant die cast components • Plated steel hardware • Plastic bushings • Plated steel internal/external components Shown with optional Unidrum hand throttle control

Throttle Pedal – Heavy Duty Standard Pedal 165-574-001 For use with one Pull-Only accelerator cable. Additional cable mounting bracket for use with a hand throttle (see Unidrum). 2.75 (70) 30 OF PEDAL TRAVEL EQUALS 2 (51) OF CABLE TRAVEL 30 OF PEDAL TRAVEL EQUALS 2 (51) OF CABLE TRAVEL Fast and Economical Installation A throttle cable simplifies the installation, providing a complete system to suit many applications. The pedal tower mechanism is designed to be dropped through the floor and secured. Cable attachment can then be quickly and easily completed. OPTIONAL CUTOUT 3.5 (89) DIAMETER OR...