Micro Adjust Description: Micro Adjust Industrial Push-Pull Control Head Push-Pull Control Head Applications: • Throttle control • Regulating valve Load: 20lb maximum Travel: 3.00؆ maximum Threaded mount Friction lock Disconnect Other Related Products: • Twist Lock • Non Lock Control Head Industrial Micro Adjust control heads are ideal for remote operation of a throttle, regulating valve, or other applications needing precise adjustment capabilities. Depressing the center button allows pushing or pulling the knob to make course travel adjustments. A flexible dust seal protects the internal release mechanism. Rotating the knob clockwise extends the output in the finite mode, and counter-clockwise retracts. Four and one-half turns results in 1؆ of linear travel. The maximum recommended load is 20lbs. Normal vibration does not affect the micro adjust setting. An optional friction lock accessory is available for applications where vibration is excessive. A disconnect feature and various output end configurations are available to suit a particular application. The ordering code and technical description show these choices. Linking Motion & Control... The Ca

Micro Adjust Material All line art dimensions are represented in inches • Plated Carbon Steel CorrosionProof Control Heads Suggested End Fittings • See Hardware/End Fittings or Call Factory for More Information Control Head Matrix VLD .38 SCREW ON CONDUIT CAP WIRE STOP 29V00 1/4-28UNF-2A .17 WIDE .41 ROOT DIA COMMERCIAL Micro Adjust Linking Motion & Control... Extended Non Lock Non Lock Twist Dimensions VLD LD Lock Cablecraft® Ordering Codes Control Head Type 2 = Micro Adjust Cable Type 1 = Low Friction-EXT 3 = Low Friction 6 = Utility 9 = Bristow Cable Size V = Very Light Duty L = Light Duty...