Horizontal Gear Shifter – 925 Series Industrial HGS Systems Based on the proven quality and performance of Cablecraft® low friction control cables, our manual transmission shifter system provides a maintenance-free, cost-effective approach that makes remote shifting easier to build and use. Common Applications: Center console mounted shifter, servo and non-servo assisted transmissions, bus, coach and truck applications, heavy to medium duty plant and agricultural vehicles, heavy to medium duty cable applications • • • • • • • • • • Easy installation, adjustment free Maintenance-free life Ends gear jump out Clean precise shifts No knob-to-cab relative movement in floating cabs No action required to tilt cab Vibration from drive train is not transmitted Reduced cab noise levels Installation design to customer requirements Flexible capability with different cable end fittings

Horizontal Gear Shifter – 925 Series Technical Data • Recommended handle lengths: 305mm to 380mm (12” - 15” approx.) • Normal working load @ knob = 3 kg (6.6 lb.) to 5 kg (11 lb.) • Accidental overload @ knob = 100kg (220 lb.) • Operating temperatures: -40°C to 120°C (-40°F to 248°F) • Weight: 3.0kg (6.6 lb.) 13.4 RATIO DIM HOLE LOCATION CUSTOMER SPECIFIC RATIO DIM HOLE LOCATION CUSTOMER SPECIFIC 2110 Summit Street New Haven, Indiana USA 46774 Tel 260 749-5105 Fax 260 749-5677 2789 Old Belleville Road St. Matthews, South Carolina USA 29135 Tel 803 655-7300 Fax 803 874-3558 4401 South Orchard...