Description: Type DC/DH Control Swivels Control Swivels Applications: Numerous low load mechanical motion transfer applications where infinite adjustment is desired, including: • HVAC • Linear controls • Light industrial applications DC/DH Swivels were developed specifically for control applications where infinite adjustment is desired along the length of a connecting rod. They are intended for low load applications and offer in-line misalignments that are suited primarily for push applications. By using a Buna N rubber disc in the assembly, smooth and vibration-free operation is realized. A wide range of sizes and styles are available to match your application. DC Model offers 5/16" hardened self-locking screw. The DC/DH Control Swivel Series is just one of many motion control devices found within our broad line of rod ends, spherical bearings, ball joints and swivels. For full product line detail, contact us for a comprehensive catalog or visit www.cablecraft.com and download individual product data sheets and other product information. • Suited to low load applications where infinite adjustment is desired along the entire length of the connecting rod • Can be used with either 1/4" or 5/16" diameter control rods • Head size: DC — .500" round DH — .375" square • Special set screws (self-locking and surface hardened for wear resistance) provide increased holding strength • Integral nut and lock washer optionally available • Can be used in the wide range of temperatures: -60°F — 250°F (-51°C — 121°C) • Custom assemblies can be built to your specifications • DC style meets SAE specification J490 (DC: Type DC, Style 1; DH does not meet J490 specs)

Control Swivels Material Ball Joint Head & Base • Low Carbon Steel • Zinc Plated, Clear Chromate Treated • Buna N Rubber Disc (provides vibration-free operation) Self Locking Screw • Low Carbon Steel, Heat Treated • Zinc Plated, Clear Chromate Treated Part Number Thread Size & Length Weight Less Integral Nut & Washer (Pounds) Weight With Integral Nut & Washer (Pounds) Less Integral Nut & Washer With Integral Nut & Washer Linking Motion & Control... Bore Diameter Chart Notes: 1. Swivels can be used with either 1/4" or 5/16" diameter control rods 2. DH Swivel Joint is available with an integral...