Button Lock Description: Button Lock Performance Push-Pull Control Head Push-Pull Control Head Aircraft Heat control Vent control A/C control Engine cowl control Shown with optional fitting Control Head Performance • Travel: 3.00؆ minimum • Bend radius: 3.00؆ minimum & 7.00؆ minimum • Operating temperature: -65°F — 230°F • Normal load (with swivel output fitting) • 120lb tension • 25lb compression Cablecraft Motion Controls button lock control head cables remotely operate and lock in position heater, ventilation, air conditioning or numerous other mechanisms needing adjustment. Depressing the center button allows pushing or pulling the knob to make course travel adjustments. Routing of the flexible cable allows installation options that are not possible with solid linkages. Various output configurations are available to suit a specific application. The ordering code and technical descriptions show available choices. Linking Motion & Control... The Cablecraft Solution

Button Lock Material • Stainless Steel or Plated Carbon Steel • Plastic Coated Carbon Steel Conduit and Innermember • Plastic Seal • Plastic Knob Standard Output - Button Lock 565-553 Notes: (Design Parameters) Stroke: 3.00؆ Minimum bend radius: 3.00؆ Operating temperature: from -65°F — +165°F at input end/+230°F at output end Normal load: 120lb tension, 25lb compression • Full Range Solid Wire Output - Button Lock 565-554 Notes: (Design Parameters) Stroke: 3.00؆ Minimum bend radius: 7.00؆ 1.00 DIA Operating temperature: from -65°F — +165°F at input end/+230°F at output end Normal load: Unspecified...