SPIRO range All manual solutions for reconditioning wires and cables The SPIRO range meets all needs: UNWIND a spool a coil WIND on a spool into a coil CABLERACK-LIGHT CABLERACK SPIRO-H1-P + M35 measuring device SPIRO-V + GRR coiling device + M35 measuring device + casters SPIRO-H2-T + M20 measuring device + cutting pliers Document et photos non contractuels SPIRO-V + M35 measuring device

The SPIRO range is composed of: ^ to wind or unwind a coil or a spool ^ to unwind a coil or a spool and wind into a coil or on a spool ^ to wind into a coil or on a spool for neatly arranged coils (with cross-winding) Measuring options M20 for cable max 0 20 mm Other options Casters ^ when the SPIRO needs to be mobile ^ to facilitate its handling and storage All bases can be mounted on casters To unroll in front of a SPIRO, the installation can be completed by: - a cable drum unwinder - a BOBI ou CABLERACK-LIGHT dispenser - a CABLERACK cable drum rack. The design of the SPIRO range ensures great...

SPIRO-H1 To wind or unwind a coil or a spool With the removable crank, work is quick. It can also be used as a coil unwinder. Ergonomic crank for winding. Adjustable rubber pads for stability. Steel frame with epoxy paint finish. Tray diameter: 700 mm Inner diameter adjustment: 110 to 500 mm Spindle height: 250 mm SPIRO-H1-T: W705.5 x D728 x H380 mm, 9.35 kg SPIRO-H1-P: W700 x D856 x H1109 mm, 24.35 kg Maximum load: 30 kg For spools - max width: 230 mm - mini central hole Ø: 21 mm

SPIRO-H2 To unwind a coil or a spool and wind into a coil or on a spool The 1st tray allows you to unwind a coil or a spool. The 2nd tray, equipped with a removable crank, allows you to make another coil or spool. Ergonomic crank for winding. Adjustable rubber pads for stability. Steel frame with epoxy paint finish. Tray diameter: 700 mm Inner diameter adjustment: 110 to 500 mm Spindle height: 250 mm SPIRO-H2-T: W1677 x D705.5 x H380 mm, 17.2 kg SPIRO-H2-P: W1600 x D700 x H1109 mm, 35.2 kg Maximum load: 30 kg For spools - maximum width: 230 mm - mini central hole Ø: 21 mm SPIRO-H2-T + M20 measuring...

SPIRO-V To unwind a coil or a spool and wind into a coil or on a spool For the reconditioning, at a fixed station, of flexible wires and cables, from a cable drum with a maximum weight of around 30 kg. To limit the efforts, it is recommended to use an unwinder by the axis. Great stability (adjustable rubber pads). Steel frame with epoxy powder coating finish. Dimensions: W750 x D657 x H1294 mm Weight: SPIRO-V: 23.7 kg, SPIRO-V-GR: 41.2 kg, SPIRO-V-GRR: 46.7 kg SPIRO-V Spooling + coiling version It is identical to the version described below and also allows coils to be made using a removable coiling...

SPIRO-V SPIRO-V spooling version It can be used to wind on all types of commercial spools (plastic, plywood, etc.). Maximum diameter: 750 mm. Maximum width: 366 mm (with central hole Ø 82 mm). Minimum diameter of the central hole: 25 mm. The drive is done by a Ø15 mm toc finger, with adjustable position on rack (from 40 to 200 mm from the axis). AXO 6000 SPIRO-V + GRR coiling device + M35 measuring device SPIRO-V + GRR coiling device + M35 measuring device + casters

M20 aluminum wheel for SPIRO-V on a cross-winding bench M20 aluminum wheel for SPIRO-H M20 polyurethane wheel for SPIRO-H Basic models M20 polyurethane wheel for SPIRO-V on a cross-winding bench M35 measuring device options M35 aluminum wheel for SPIRO-V on a cross-winding bench M35 aluminum wheel for SPIRO-H M35 polyurethane wheel for SPIRO-H Basic models M35 polyurethane wheel for SPIRO-V on a cross-winding bench Other options Casters Cutting pliers Code SPIRO-XCC In principle, measuring a long product by scrolling cannot be perfectly accurate. It is the user’s responsibility to carry out their...

Complementary products LIGHT 120 - 220 - 320 cable drums unwinders ST cable drums unwinders POLY 1500 - 2500 cable drums unwinders AXO cable drums unwinders

Complementary products BOBI dispenser CABLERACK LEGER dispenser CABLERACK cable drums rack