Pulleys and rollers When pulling cable from a cable drum into a conduit, especially in urban areas, the cable runs over edges and corners, and may be damaged beyond repair. Pulleys and rollers prevent this friction and damage. They also reduce the pulling power needed. Pulley PL1AC-LIN Conceived to last long in the hardest conditions Maintenance-free dust-proof ball bearings Maintenance-free dust-proof ball bearings Diabolo dimensions : Width: 185 mm - Outside Ø: 110mm Cylinder Ø in the center: 75 mm Linear cable pulling For cable Ø maxi: 160 mm Max load: 300 kg Raised ground clearance Available from stock Dimensions: L240 x P295 x H245 mm Weight: 4 kg Pulley PL1NY-LIN High load nylon roller (600 kg) with ball bearings Diabolo dimensions: Width: 210 mm - Outside Ø: 150 mm Cylinder Ø in the center: 75 mm Linear cable pulling For cable Ø maxi: 210 mm Max load: 600 kg Fully stamped bracket (no welds), zinc plated finish Dimensions: L245 x P245 x H245mm Weight: 3,5 kg Pulley PL3AC-ANG 3 abrasion resistant alloy steel rollers Diabolo dimensions: Width: 175 mm - Outside Ø: 110 mm Cylinder Ø in the center: 75 mm Angle cable pulling For cable Ø maxi: 130 mm Max load: 300 kg Pulleys can team up to smooth out the angle Dimensions: L410 x P310 x H305 mm Weight: 12,35 kg Pulley PL3AC-BDC 202221015 - Document et photos non contractuels Diabolo dimensions: Width: 192 mm - Outside Ø: 110 mm Cylinder Ø in the center: 75 mm Horizontal / Vertical pulling at 90° For cable Ø maxi: 155 mm Max load: 300 kg For corners and edges Galvanized steel support Dimensions: L220 x P360 x H520 mm Weight: 10,65 kg

Pulley PL1AC-BDC Steel roller on ball bearings Diabolo dimensions: Width: 120 mm - Outside Ø: 220 mm Cylinder Ø in the center: 160 mm Horizontal / Vertical pulling at 90° For cable Ø maxi: 150 mm For sump inlet and outlet - For corners and edges Galvanized steel support. Dimensions: 230 x 120 x 241 mm Weight: 9 kg Pulley PL4AC-CAG Roller dimensions : Width: 115 mm - Outside Ø: 35 mm Linear or angle pulling Cable maintained between the 4 rollers (1 removable) For cable Ø maxi: 80 mm Galvanized steel support Dimensions: L220 x P345 x H185 mm Weight: 4,4 kg Pulley PL4AC-CAGCYL Roller dimensions...

Pulley PL1AC-CAGSUSP Diabolo dimensions: Width: 170 mm - Outside Ø: 110 mm Cylinder Ø in the center: 75 mm Linear cable aerial pulling For cable Ø maxi: 80 mm Galvanized steel support Dimensions: L295 x P110 x H340 mm Weight: 6,95 kg Pulley PL2AC-V 2 V-rollers Roller dimensions: Length: 685 mm - Outside Ø: 61 mm Sealed ball bearings Linear cable pulling at cable drum outlet Hot painted frame and galvanized steel roller Dimensions: L1020 x P500 x H490 mm Weight: 30 kg 202221015 - Document et photos non contractuels