Charging of electric cars Easier and more convenient Why unroll and wind by hand, each time, the cable of his electric car? With these spring-loaded cable reels, the cable automatically rolls and unrolls. The cable no longer drags on the ground: It does not dirty, does not become worn and do not deteriorate. It is not likely to cause falls. 2 types of connectors Type 1 The connector type 1 is equipped with 5 contacts: - 3 of power: L1, N and PE - 2 of communication : PP (closeness) and CP (pilot control). It corresponds to the North American and Japanese standards. It is very common on vehicles, but is not usually installed on charging stations. This connector can only be used for single-phase recharge. Max 32A 230V. The connector type 2 is equipped with 7 contacts: - 5 of power: L1, L2, L3, N and PE - 2 of communication : PP (closeness) and CP (pilot control). It corresponds to the European standard for AC charging stations. It is the most commonly used connector within the European manufacturers of electric cars. This connector can be used for single-phase and three-phase recharges. Max 32A 230V / 32A 400V. 2 ranges of automatic cable reels Automatic cable reels to install after the WALL BOX Document et photos non contractuels - 20211020 Automatic cable reels with WALL BOX inside (3,7 kW)
Open the catalog to page 1Automatic cable reels with WALL BOX inside (3,7 kW) NEW Dedicated electrical outlet More comfortable, cleaner, safer To charge your electric car, do the same thing as at the gas station: 1 - Pull the cable, it unrolls 2 - Plug in, the car recharges 3 - Unplug, the cable reels itself 4 - Hit the road The cable no longer drags on the ground, it does not get dirty and does not risk to be damaged In accordance with the Mode 3 of the international norm IEC 61851-1 Must be installed by a professional. Requires a differential circuit breaker. Functioning WI-FI status The colour informs you about the...
Open the catalog to page 2Automatic cable reels to install after the WALL BOX Total length Cable type Input plug Output plug Document et photos non contractuels - 20211020 - White plastic carter shockproof, green cover - Swivelling bracket - Level of protection IP42 - Horizontal and vertical use - Detent ratchet every 50 cm, easily removable if you want the cable to be in permanent traction - Double grounding contact - Collector isolation voltage 2.5 kV - Roller cable guide - Brass ring collector and brushes - Use temperature - 5°C/+50°C - Height 280 mm, width (bracket included) 305 mm, depth 145 mm - For vertical use,...
Open the catalog to page 3Automatic cable reels to install after the WALL BOX VSTEEL 500 range - Painted steel and polymer housing - Level of protection IP65 - Optional fixing brackets - Horizontal and vertical travel (depending on options) - High quality steel spring loaded (long-lasting in time) - Supplied without fixation bracket, cable guide or ratchet (see options) - The options are delivered disassembled - Use temperature - 5 °C/+50°C - Maximum winding speed: 30 m/minute - Collector isolation voltage 2.5 kV Total length Cable type Input plug Singlephase 32A Type 2 Three-phase VDE-AR-E 2623-2-2 16A Output plug Fixed...
Open the catalog to page 42 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
1 Page
36 Pages
1 Page
1 Page
1 Page
1 Page
2 Pages
2 Pages
1 Page
2 Pages
2 Pages
7 Pages
9 Pages
1 Page
1 Page
1 Page
1 Page
5 Pages
3 Pages
2 Pages
1 Page
5 Pages
1 Page
1 Page
1 Page
4 Pages
4 Pages
4 Pages
4 Pages
1 Page
1 Page
1 Page
1 Page
4 Pages
1 Page
1 Page
7 Pages
1 Page
1 Page
4 Pages
1 Page
5 Pages
4 Pages
4 Pages
1 Page
5 Pages
3 Pages
3 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
2 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
3 Pages
4 Pages
2 Pages
1 Page
4 Pages
1 Page
2 Pages
1 Page
1 Page
1 Page
2 Pages
2 Pages
3 Pages
1 Page
1 Page
2 Pages
1 Page
1 Page
1 Page
1 Page
2 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
2 Pages
1 Page
2 Pages
12 Pages
1 Page