Cable pulling grip Domestic installations These single loop cable grip socks are specially designed for domestic installations. Hand-made, they are particularly flexible and can be used in small diameter ducts. They allow electricians to quickly and simply pull electrical wires, power cables or telecom cables, without wasting time hooking them up. To insert or remove the cable: compress the sock to expand it. Once the cable is in the sock: the more you pull, the more the sock tightens. High strength galvanized steel wire. The tensile force is equal to the breaking force reduced by a safety factor of 1.5. The ends of the wires are neither soldered nor crimped, but braided back to avoid injuring the operator or damaging the cable. These models are available from stock. Cable pullers should be checked before use as damage may affect their strength. 20190417 - Document et photos non contractuels

Cable pulling grip Underground wiring These single loop cable pulling socks are specially designed for underground wiring. Handcrafted with very flexible 19-strand yarn, they retain their flexibility even under high tension. Galvanized steel (also available in stainless steel). The crimped sleeve is chamfered in the direction of the pull to avoid snagging in the pipes. The ends of the wires are neither soldered nor crimped, but braided back to avoid injuring the operator or damaging the cable. The tensile force is equal to the breaking force reduced by a safety factor of 2. To insert or remove...

Cable pulling grip Other applications When it comes to cable grip socks, we can meet the most varied demands as standard. Matter : - galvanized steel - stainless steel - synthetic with kevlar (non-conductive, non-magnetic, non-corrosive). Form : - closed with single buckle - closed with M5 connector - open to side buckle - open double buckle (with or without retaining laces) - multiple allowing 3 cables to be pulled at the same time (3 braids and a common loop). For all applications : - domestic installations - underground wiring - overhead wiring (high security triple braid) - suspension of...