Cable display rack RCL19 To assess offcuts and to present them at the time of selling - Modular system that allows adjusting the rack to one's requirements - There are 2 types of rows: outbound and series, the rack begins from a outbound row and is completed by one or several series rows. - Useful width: 1.900mm - Number of arms: 12 arms - Height: 2,100 mm - Inclined ladders - Depth: 620 mm / 260 mm - Width of ladders: 56 mm - Adjustable system: the position of the galvanised vertical slides is changea-ble on the red horizontal stacks and the position of the arms is adjustable on the vertical slides - The arms (length 440 mm) are inclined at an angle of 10° towards the rear The maximum load per arm is 80 kg (approximately 5 heavy coils) - the arms are delivered without label holder (optional) - Made of steel, galvanised and epoxy finish red RAL 3020 - Fixing to the floor mandatory - Delivered in dismantled conditions - Optional: Never again ! additional arm (code RCLBRAS) Label holder 120x80mm (code RCLETIQ) Label holder (Optional) www.cable-equipements.com www.cable-equipements.com