Catalogs >
CABLE EQUIPEMENTS >
Balancers

Balancers
1 / 3Pages

Catalog excerpts

Balancers cancel the weight of the tool or instrument used and make the work less tiring, especially the one in series, which involves repetitive use of the same tool. Useful in assembly , ideal for work stations. Common features of the 2 models : - die-cast aluminium case - 3 anchorage points - easy length adjustment by the position of the stop ball. Each model is available in 2 versions : - traditional model : stainless steel support cable - new model : textile cable’s support cable in polyethylenic HT fibre. new model : textile cable’s support cable in polyethylenic HT fibre. It avoids the risk of damage to the components near the work area that may accidentally touch the cable. Document et photos non contractuels - 20210526

Open the catalog to page 1

Balancers EQ2 Length 1600 mm Adjustment of the pulling force by secure knob : EQ3 Length 2500 mm Adjustment of the pulling force with a key (not supplied) : Document et photos non contractuels - 20210526

Open the catalog to page 2

Spiral hose for balancers This spiral hose allows to supply compressed air for the tool. Hose 8x10 mm (PA12). Maximum pressure : 10 bars. Working temperature : -20°C/+80°C. The spiral hose is equipped with a quick connector at each end. He is supplied with an additional meter of hose for connection to the compressed air network and to the tool. It can only be applied on balancers EQ2. The ROTOLIFT is an automatic cable reel equipped with stopping device, and with a stainless steel support cable 0 6mm. It allows to suspend objects (up to 18 kg) and to put them within reach to the operating...

Open the catalog to page 3