Endless screw jacks type AXO 1600 For drums up to 1,6 ton The AXO 1600 (formerly SM12) is made of several elements : - two stands (where the rear foot can be dismounted) - shaft with centering devices can therefore be moved easily For cable drums : - Diameter : 600 to 1.600 mm - maximum width 1.100 mm Shaft Ø 48 mm, centering pins Ø 55-100 mm Dimensions of each stand : l 680 x W 900 x H 700 mm Total weight : 75 kg The AXO 1600 exists in 2 versions : - with nylon ring shoes (code EAX016-16N) - with shoes fitted with ball bearings (code EAX016-16R) Also available for RENT Hydraulic jacks AXO 6 tons For drums up to 6 tons The AXO 6 TONS is intended for unwinding large cable drums on construction sites or in workshops. Composed by two hydraulic jacks and one unwinding axle. For cable drums: - diameter : 750 to 2.700 mm - maximum width : 1.650mm - maximum weight : 6 tons. Easy unwinding: 2 bearings are provided on each side. Easy to move by tilting, thanks to the handle, on two 180mm diameter wheels. Lifting eye. 2 hydraulic cylinders with foot pump. Movable clamp (10 positions) to facilitate mounting. Blocking system for shaft to prevent ejection of cable drum. Once attached to the ground, the AXO6000 can be used in front of a winding machine. Movement Dimensions of one jack : 650 x 400 x 1360 mm Weight of each jack : 71,5 kg Total weight : 169 kg 20210601- Document et photos non contractuels Axle lock

Hydraulic jacks AXO 10 tons For drums up to 10 tons The AXO 10 TONNES is intended for unwinding large reels, on site or in the workshop. The range inclised 4 different models as follows : - the maximum diameter of the drum : 2200 mm or 3200 mm - the maximum width of the drum : 1350 mm or 1900 mm - the bearings that support the axis: with or without ball bearings. Bearings With bearings : ideal for manual pulling at low speed. The unwinding is very easy. Without bearings : ideal for mororized pulling (winding machine, capstan winch). The plain bearing exerts a natural brake which reduces the inertia...