Cable marking using wrap-around labels

WICON wrap-around applicator See a video, instructions, service manuals checklists and spare part lists of WICON on www.cab.de/en/wicon-docu Cylindric items of diameters from 2 mm to 16 mm, such as single wires, strands, cables, hoses, tubes or round rods, can be labeled with the wrap-around applicator. Transparent laminate covers data blocks and protects them persistently from dust and wear. Items are inserted in horizontal orientation and centered by panels. The following options are available for printing and labeling: 1. Single items are inserted by hand. Items are positioned by centering...

Technical data Wrap-around applicator 3 Centering panel distant from left to right 4 Item length label margin to stop 5 Label margin distant to centering panel Deflection related to a length of 124 mm mm max. height Applicator Cycle of printing and applying or applying and printing Number of wrap-arounds Speed of wrapping aroundu/sec 3.0 Rolling on related to% 10 - 100 speed of wrapping around Start automatically, as soon as an item has been inserted by hand or via data interface Label margins can be aligned 25 mm to 120 mm distant to the stop by scale. The applicator is aligned to the edge of...

WLV wrap-around labels Labels can be removed from the peel-off plate of a printer by hand or be applied by the wrap-around applicator directly onto items. The properties of cab wrap-around labels are adapted to automated labeling using WICON, so is manufacture. All labels ‒ from the first to the last ‒ are applied precisely with the help of pretesion and retension. cab does not provide any functional warranty if third-party labels are in use. All-around labeling Data blocks capture the circumference of an item to the D1 diameter. Data blocks are partially covered in cases of smaller diameters....