Two-color print and apply system Hermes C
16Pages

Two-Color Print and Apply System Hermes C Made in Germany

Two-color printing and applying in real-time Hermes C is the first labeling system worldwide to print and apply two-color labels in one operation. It has been developed and optimized especially for applications corresponding to the new Classification and Labeling Inventory according to GHS. All shapes of packaging can be marked, for example bottles, cans, drums, buckets, cardboard or pallets. Because of the modular construction system Hermes C offers a proper solution for every application. Due to the integrated backfeed system single labels can be printed and applied on request without...

Technical details Graphic display The white backlight provides good readability. Depending on the installation position, the display may be turned in 90° steps. Navigator pad Simple, interactive menu control, only applicable functions are displayed by the day and night design. Along with the graphic display the menu navigation is easy to understand. Ribbon holder Quick and simple exchange of ribbon due to three-part tightening axles Metal chassis For the mounting of the modules it is made of torsion resistant die-cast aluminum. Print positioning The print position is automatically set after...

RS232C interface (restricted function) Ethernet 10/100 Mbit/s interface with TCP/IP Two USB master interfaces to connect an external operation panel, a keyboard, a scanner or a service key Slot for a CompactFlash Type I memory card Connection of a warning light: The warning light displays the printer status. Green Device switched on Yellow Prewarning to end of label resp. ribbon Red Error Connection of a main valve for air pressure supply: For centrally switching on or off the compressed air supply Connection of an external E-Stop: Along with a connected main valve this interface allows to...

Technical data 1.1 Label printer Hermes C 6L/300-3 Print head Method of printing Thermal transfer Printable resolution dpi 300 Print speed up to mm/s 125 Print width up to mm 162.6 Material Labels on rolls Paper, plastics such as PET, PE, PP, PVC, PU, acrylate, PI Thickness mm/weight g/m2 0.05-0.2/60-160 Width labels1) mm 46 -176 liner mm 50-180 Label height mm 20-356 Material backfeed speed mm/s 100 (default setting) distance mm 115 Media roll outer diameter up to mm 305 core diameter mm 76 winding Outside or inside Ribbon Ink Outside or inside Roll diameter up to mm 80 Core diameter mm 25...

Stroke applicators 4126/4136 Tamp pad Labels are precisely applied on flat surfaces. Spring-mounted tamp pad Allows labels to be applied even on curved surfaces up to approx. 8°. Roll-on pad While in transport, labels are rolled on flat surfaces. Stroke applicator For real-time labeling on packaging or products. According to the type of pad the product is either in motion or not. Labels may be applied on the product from all sides. Silicone form pad on request The pad is positioned above the peel-off plate. The label is held by the applicator during the printing process. A short stroke...

Vacuum belt applicators 5326/5426 2.2 Vacuum belt applicator For real-time labeling on packaging or products in motion. Labels may be applied on the product from all sides on plane or cylindric surfaces, or corner-wrap. The vacuum belt applicator is positioned in front of the peel-off plate. The printed label is moved to the labeling position via vacuum belt and applied on the packaging via external signal. Printing and labeling may be done simultaneously. Technical data Labeling Dispensing direction Label width mm Label height mm Product during labeling in motion Labeling on the product...

Extra equipment Hermes C 3.1 Cover V for vertical mounting The cover protects the Hermes C from dirt and damage. Cover H for horizontal mounting With additional dust protection at the side of the product Extra equipment Applicators 6.1 External operation panel If the operation panel is not accessible after the printer has been installed, an external operation panel may be additionally connected. There is a slot for a CompactFlash Type I memory card and a USB host interface, which is further available. Standard keyboard USB connection, 115 keys Memory card CompactFlash Type I to store label...

Accessories Dispensing and removing labels manually To dispense and remove labels manually a present sensor is needed. In this case, it is advisable to use a mounting foot. The label printer may be mounted with or without a cover. 1. Automatic dispensing The present sensor PS11 detects when the label is in labeling position. After the label has been removed manually the next label is printed instantly. 2. Dispensing on request The print and apply process can be started by pushing the button at the present sensor Hand switch TR2 Printing and dispensing on request via the I/O interface. The...

Stands for mounting Stand 1622 For mounting Hermes C in a vertical position into a production line. Height and depth are adjustable by a toothed rack/crank. In addition, the labeling system may be rotated 360° around its axis. The air pressure regulation unit and the warning light are to be mounted on the bracket. Technical data Adjustable feet mm Load max. kg (1) Lower edge of printer - ground mm (2) Depth crosswise to direction of transport mm (3) Depth lengthwise to direction of transportmm (4) Rotation ° Weight approx. kg For mounting Hermes C in a horizontal position into a production...

Labels and ribbons • Two-color printing on labels in real-time Sample label • For chemical products such as oils, colors or detergents • On drums, buckets, boxes, pallets etc., resistant to acid and saltwater • Labels for two-color printing according to GHS • Certified according to British Maritime Standard BS5609, part 3 In this test, labels that have spent at least three months in sea water must stay affixed on aluminum drums and printed data must still be legible. For this purpose, cab provides labels made of polyester or polypropylene as well as proper ribbons. Please contact cab. 0,88...