Products for the Electronic Industry
23Pages

{{requestButtons}}

Catalog excerpts

Products for the Electronic Industry - 1

Devices and systems for the electronics production

Open the catalog to page 1
Products for the Electronic Industry - 2

Types Off-cut remover HEKTOR 2 Conveyor belt Special magazines Design and technical specifications correspond to the date of the printing. Subject to change. The data provided in the catalog do not represent any warranty or guarantee. For current data see website www.cab.de/en/electronics

Open the catalog to page 2
Products for the Electronic Industry - 3

Off-cut remover HEKTOR 2 Technical data Separation method Operation Material PCB thickness Air pressure supply Operating pressure, typical Temperature / Operation humidity Stock not condensing Transport Width x Height x Depth Weight Approvals Milled groove width Matrix included in the scope of delivery Off-cut width L blade used with small distances between the off-cuts A Blade 1,5 T ≥ 1.5 Blade 2,0 T ≥ 2.0 Blade 2,4 T ≥ 2.4 Blade 2,5 T ≥ 2.5 Blade 3,0 T ≥ 3.0 Blade 1,5 L ≥ 1.5 Blade 2,0 L ≥ 2.0 Blade 2,4 L ≥ 2.4 Blade 2,5 L ≥ 2.5 Blade 3,0 L ≥ 3.0 Matrix (as a spare part) PCB bottom side...

Open the catalog to page 3
Products for the Electronic Industry - 4

PCB separators MAESTRO 2, 2M Technical data Separation method MAESTRO 2 MAESTRO 2M Component side Circular blade Solder side Circular blade manual motor-driven Operation Separation speed 100, 200, 300 mm/s Separation length 15 - 300 mm Material FR4 Component height Solder/component side up to 34 mm Power supply 230/115 VAC, 50/60 Hz Temperature / Operation + 10 - 35°C / 10 - 85 % humidity Stock 0 - 60°C / 20 - 80 % not condensing Transport  – 25 - 60°C / 20 - 80 % Width x Height x Depth 195 x 330 x 620 mm 16 kg 19 kg Weight Approvals CE, FCC Class A The compact MAESTRO 2 separates PCBs...

Open the catalog to page 4
Products for the Electronic Industry - 5

PCB separator MAESTRO 3E Technical data Separation method Operation Separation length Material Component height Component side up to 34 mm up to 23 mm Solder side Temperature / Operation humidity Stock not condensing Transport Width x Height x Depth Weight Approvals Component height Outside dimensions increased after separation: typically 0.2 mm The milled groove may be interrupted by cutouts. A PCB is positioned with its milled groove onto the linear blade and the circular blade is moved manually through the PCB. The distance between the holder and the linear blade is set so the PCB can be...

Open the catalog to page 5
Products for the Electronic Industry - 6

PCB separator MAESTRO 4S Technical data Separation method MAESTRO 4S separates both small and large PCBs quickly and economically without stress. Key features: - Blade distance to be entered on the operation panel is set motor-driven. - Up to nine programs to be stored - Separation length to be continuously adjusted via limit switches - In terms of a preventive blade maintenance, the cutting performance is displayed. Operation Separation speed Materials Component height Separation length Support table depth Programming Start Programs Separation steps Blade distance Key button Performance...

Open the catalog to page 6
Products for the Electronic Industry - 7

PCB separator MAESTRO 4S Separating aluminum Component height Aluminum PCBs are manufactured in various alloys. Sample PCBs added to a request help with adjusting the circular blade and optimizing the cutting geometry. To separate aluminum with MAESTRO 4S, special adjustment is needed for the standard circular blade. For information see the operator's manual Outside dimensions increased after separation: typically 0.2 mm The milled groove may be interrupted by cutouts. 10 ° Protruding components need a recessed linear blade. Contact us, if required Conveyor belt to deposit separated PCBs...

Open the catalog to page 7
Products for the Electronic Industry - 8

PCB separator MAESTRO 5L Technical data Separation method Component side Circular blade Solder side Circular blade motor-driven 100 - 220 mm/s to be set in ten steps Operation Separation speed PCB length light barrier activated light barrier deactivated PCB width Residual off-cut width Component height Number of circular blades Programming Display It can be used economically when large quantities of milled PCBs have to be separated. Up to 15 PCBs arranged next to one another can be separated simultaneously. 310 mm is the maximum passage width. The distances and the number of circular blades...

Open the catalog to page 8
Products for the Electronic Industry - 9

Separation of milled PCBs up to a length of 1,500 mm with a minimum of stress on the components Overall technical data Separation method The MAESTRO 6 is the consequent further development of the proven cab PCB separators. Even very lengthy PCBs can be separated fast, economical and without stress. Operation Separation speed The carriage power unit is assembled behind the linear blade. This crucially simplifies the separation and removal of the PCBs. Support table depth Operation panel Control buttons Component side Circular blade Solder side Linear blade path-optimized up to 500 mm/s up to...

Open the catalog to page 9
Products for the Electronic Industry - 10

PCB separator MAESTRO 6 MAESTRO 6/X03 Separation of FR4, CEM3 and aluminum PCBs up to lengths of 1,500 mm Simple and quick change of FR4/CEM3 blades to aluminum blades or the other way round Height of circular blades to the linear blade to be set individually Technical data Circular blade Separation speed Materials Component height PCB separator MAESTRO 6/603 PCB separator MAESTRO 6/903 PCB separator MAESTRO 6/1203 PCB separator MAESTRO 6/1503 PCB separator MAESTRO 6/xx03 alu PCB separator Power cable Type E+F, length 1.8 m Foot switch Allen key 2 mm Dial gauge Operator's manual DE/EN Width...

Open the catalog to page 10
Products for the Electronic Industry - 11

MAESTRO 6/601.70 Separation of FR4 and CEM3 PCBs up to lengths of 600 mm and component heights of 70 mm; further lengths on request PCB separator Power cable Type E+F, length 1.8 m Foot switch Allen key 2 mm Dial gauge Operator's manual DE/EN 6/601.70 diameter 185 mm up to 500 mm/s FR4, CEM3 Component side up to 63 mm Solder side up to 22 mm Width x Height x Depth 1,150 x 410 x 450 mm Weight 50 kg Part no. 8933933.001 Wear parts Circular blade 185 Linear blade 450 Linear blade 600 Blade protection 1 X01/70 Blade protection 2 X01/70 Technical data Circular blade Separation speed Materials...

Open the catalog to page 11
Products for the Electronic Industry - 12

PCB magazine series 100, 180, 300 providing 32 PCB slots To be equipped both in vertical and horizontal orientation The system's variable width enables individual assembly according to any PCB size. Magazines 100, 180 and 300 mm in height are offered for the various PCBs. 32 slots in gaps of of 10 mm offer maximum packing density. Safe guidance Funnel-shaped slot entries ensure safe PCB insertion. Yellow position stickers indicate the exact positions and prevent from falsely inserting PCBs diagonally by hand. Carry handle to be retracted Consecutive numbers and markings Bracket for...

Open the catalog to page 12

All Cab Produkttechnik GmbH & Co KG catalogs and technical brochures

  1. MACH 4S

    12 Pages

  2. SQUIX

    28 Pages

  3. Marking laser

    24 Pages