Print and Apply System HERMES Q
43Pages

{{requestButtons}}

Catalog excerpts

Print and Apply System HERMES Q - 1

Products need labeling Print and apply systems

Open the catalog to page 1
Print and Apply System HERMES Q - 2

Data security in label printing Modern manufacture sees marking systems work autonomous, interact among each other, with host computers or a plant control unit. Data security is a key issue. The integration of components, their administration and authentification are sensitive tasks demanded from the corporate IT. cab systems developed for printing and applying labels1 provide proper features by default, fairly protecting your data in a network. Permissions can be assigned to users and restricted by passwords. Firmware updates are verified for integrity before installation. Access to...

Open the catalog to page 2
Print and Apply System HERMES Q - 3

Contents Page 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cabPROTECT Pages 4 - 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HERMES Q Pages 14 - 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Software Pages 16 - 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applicators Page 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools to assemble Pages 35 - 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Floor stands Pages...

Open the catalog to page 3
Print and Apply System HERMES Q - 4

HERMES Q Printing labels and applying them automatically in production lines 1.1 The slim one to print small labels Label printer Printable resolution dpi Print speed up to mm/s Print width up to mm Label roll outside diameters mm Label width up to mm An industrial bestseller, providing a wide range of accessories Label printer HERMES Q4.3 HERMES Q4 Printable resolution dpi 200 300 300 600 Print speed up to mm/s 300 300 300 150 Print width up to mm 104 108.4 105.7 105.7 Label roll outside diameters mm 205 / 305 Label width up to mm 114 to print Odette, UCC and GS1 labels in logistics...

Open the catalog to page 4
Print and Apply System HERMES Q - 5

Label rolls All units can provide an unwinder for picking up rolls with maximum diameter either 205 mm or 305 mm. Directions to which dispense labels All units can be designed for providing labels either to the left or to the right. Orientations of assembly All the units can be rotated vertically by at most 360° or assembled in horizontal orientation.

Open the catalog to page 5
Print and Apply System HERMES Q - 6

❶ peration panel O Self-explanatory symbols are on display. The device can thus be operated intuitively and settings be configured easily. ❷ ibbon holder R On the basis of three-part tightening axles, ribbons can be replaced easily and quickly. ❸ ugged metal chassis R It is made of cast aluminum. All the parts are assembled to it. ❹ pplicator A It is assembled to hinge pins. It can be pivoted in case of maintenance or if materials have to be replaced. ❺ ressing plungers P One is fixed near the chassis wall. The second one is pushed to the label margin, as far as necessary to evoke a good...

Open the catalog to page 6
Print and Apply System HERMES Q - 7

Print heads Units of the same width are interchangeable. They are detected by the CPU automatically and calibrated. The print distance to the locating edge can be adjusted. Major data such as the operational performance, maximum operating temperature and heat energy are recorded on the print head. Data can be read at the factory. Print heads provided for HERMES Q2, HERMES Q4 - 300, 600 dpi - sharp-edge print images - e.g. when printing small fonts and graphics on typeplates - e.g. when printing on materials requires high energy needs Print heads provided for HERMES Q4.3, HERMES Q6.3 - 200,...

Open the catalog to page 7
Print and Apply System HERMES Q - 8

Operation panel Self-explanatory symbols are on display. The device can thus be operated intuitively and settings be configured easily. ❶ ED: Power ON L ❷ tatus bar: data reception, record data stream, pre-warning S to a ribbon ending, SD memory card / USB memory stick plugged in, Bluetooth, WLAN, Ethernet, USB slave, time ❸ rinter status: ready, pause, number of labels printed in a print job, P label in transfer position, awaiting external start signal ❹ SB slot to connect a service key or a memory stick, U to transfer data to the IFFS memory ❺ peration O Printing and applying labels in...

Open the catalog to page 8
Print and Apply System HERMES Q - 9

Accessorial products are plugged or screwed to a printer by the customer. Designation roll Ø SD memory card USB memory stick USB WLAN stick USB WLAN stick including a rod antenna USB Bluetooth adapter Product sensor, 3 pins Product sensor, 25 pins I/O interface connector SUB-D, 25 pins Warning light External operation panel Connecting USB cable Label selection - I/O box Hand switch TR2 Foot switch Connecting RS232 C cable Scanner CC200 USB WLAN stick 2.4 GHz 802.11b/g/n hotspot or infrastructure mode USB WLAN stick including a rod antenna to extend the range of operation 2.4 GHz 802.11b/g/n...

Open the catalog to page 9
Print and Apply System HERMES Q - 10

Options Theypartsassembled perform special functions. are or units to are to a printer in addition to or instead of standards. Designation roll Ø 205 305 HERMES Q2 HERMES Q4.3 HERMES Q4 HERMES Q6.3 .250 .001    Automatic ribbon saving        Label unwinder K40         Adapters 40/50 and 76/100        Spacers       Margin stop 10        Cover         Print head pressure system, reduced force        Extended peel-off plate (+10 mm)         Print roller DRS         Antistatic brush        Draw roller ZS        ...

Open the catalog to page 10
Print and Apply System HERMES Q - 11

Cover to prevent from contamination and contact Maximum outside diameter for label rolls is 205 mm If the tamp-on pad of an applicator immerses more than 25 mm, the cover must be adapted. Assembly in vertical orientation, rotated by ± 90° or horizontally Print head pressure system, reduced force Thermal direct printing requires less pressure on a print head. Reduced force results in a decrease of wear. Product life extends. Thermal direct printing only Extended peel-off plate (+10 mm) Recommended - if labels are picked up by a robotic arm, - if readable area is required for scanning, - when...

Open the catalog to page 11
Print and Apply System HERMES Q - 12

Technical data Label printer type Thermal transfer Printing method Thermal direct Printable resolution dpi Print speed up to mm/s Print width bis mm Direction to which dispense labels Print distance to the locating edge mm incl. automatic ribbon saving L/R mm Materials Labels on a roll on a reel Labels1) Width mm Height from mm Thickness up to mm Liner tape Width if operating a roll mm Width2) if operating a reel or a roll mm Thickness up to mm Roll unwinder Outside roll diameter up to mm reel diameter up to mm Core diameter mm Winding Roll rewinder Outside diameter up to mm Core diameter...

Open the catalog to page 12

All Cab Produkttechnik GmbH & Co KG catalogs and technical brochures

  1. MACH 4S

    12 Pages

  2. SQUIX

    28 Pages

  3. Marking laser

    24 Pages