LABELING HEADS // LABEL SENSOR CEON Label sensor to detect particularly thin or transparent label materials When self-adhesive labels are applied automatically, paper or plastic materials are in use depending on the requirement. The range includes particularly thin, transparent or metallized labels. The intelligent CEON label sensor on the labeling head supports reliable identification and precise positioning of all conventional label materials. Good reasons for choosing CEON label sensors by cab Delivery program Part no. Pack unit easy assembly directly on the peel-off plate Label sensor CEON Label sensor CEON detection of all label materials at any mesh width precise detection even at very high dispensing speeds up to 24,000 inches/min high repeat accuracy ManualTeach sensor balance independent from the system and by means of AutoTeach directly on the labeling head IXOR Further retainer bars are provided for the IXOR labeling head. M12 plug, 4 pins, a-coded operating voltage 15 to 30 VDC push-pull output: PNP, NPN, 40 mA, short-circuit proof Wilhelm-Schickard-Str. 14 76131 Karlsruhe / Germany Do you have needs, questions or suggestions? Advisory services: [email protected] Sales: [email protected] Repair: [email protected] For further information see www.cab.de/en