AXON
18Pages

Labeling systems for tubes and vials

Reliable tube and vial labeling using AXON Tubes

Samples identified in real time Symbols on the control panel support AXON be operated intuitively. Replacing a label roll or a ribbon is no big deal. In cases of cleaning or wear, print rollers and transport rollers are easy to remove using a tool attached. Unique labeling enables samples be assigned quick and reliably in labs. In practice, self-adhesive labels are applied individually to tubes or vials. 1D or 2D encoding enables samples be processed fully automated in transport and filing. AXON has been designed for direct thermal and thermal transfer label printing. 300 dpi or 600 dpi...

AXON 1 tube labeling systems ❶ ❶ Ribbon retainer Materials are easy to remove with the help of a three-part tightening axle. ❷ Antistatic brush Electrostatic charge dissipates after printing, in particular if plastic materials are in use. ❸ Transport roller Labels are applied to tubes or vials. Height setting according to the length of a tube or vial ❹ Control panel Intuitive operation using self-explanatory symbols Rotation in steps of 90° by software command ❺ Internal liner rewind unit Materials are easy to remove with the help of a three-part tightening axle. ❻ Print roller Synthetic...

Options provided for AXON 1 tube labeling systems 3.1 Cast aluminum cover It prevents from contamination. A large inspection window is provided. CC200-AXON code verifier 1D* codes are checked by a camera. One code per label can be verified in terms of readability (GOODBAD). Results are compared with the print data (VERIFY). *2D codes in preparation Warning on a label roll ending, in preparation Remaining roll diameters are detected by a sensor. The I/O interface indicates predefined minimum values. Diameters may be requested or displayed also using data interfaces. K Type peel-off plate,...

AXON 2 tube applicator See information on SQUIX 4MP label printers www.cab.de/en/squix Adapted specifically to tubes and vials Labels are applied to tubes or vials of diameters 10 mm to 22 mm. By moving the roller along the shaft to specified positions, closure caps or protruding threads remain located beside the roller. Operations require labels no more than 56 mm wide and a Type 56 peel-off plate. In cases of smaller diameters or wider labels, adapted transport rollers are provided as options. Aligned according to the length of a tube or vial Tubes or vials are pressed against the...

Options provided for SQUIX 4MP label printers 2.1 Slim DR4-M print rollers If narrow labels are in use, accurate print images require adapted print rollers. Enhanced roller wear and contamined print heads are avoided, so are errors during label feed. DR4-M30 - labels no more than 25.4 mm wide DR4-M60 - labels no more than 56.0 mm wide DR4-M80 - labels no more than 76.0 mm wide Peel-off plates Feeding below a pulley promotes labels be dispensed reliably. Type 56.1 - labels nor more than 56 mm wide (Ø14 mm)* Type 56.2 - labels nor more than 56 mm wide (Ø18 mm) two pressure rollers Ø19 mm are...

Control panel Intuitive operation Settings are easy to configure using self-explanatory symbols. Landscape or portrait display depending on the orientation of assembly AXON 1 tube labeling system ❷ Status bar: Receive data, record datastream, warning on a ribbon ending, SD memory card / USB stick plugged, WLAN, Ethernet, USB slave, Time ❸ Printer status: Ready, pause, number of labels printed on a print job, label in peel-off position, awaiting external start signal ❹ USB slot to plug a service key or a memory stick, to store data in the internal IFFS printer memory ❺ Operation Print and...

Interfaces AXON 1 tube labeling system ❶ Slot to plug a SD memory card ❷ 2 USB hosts to plug a service key, a USB stick, a keyboard, a barcode scanner, an USB WLAN stick or an external control panel ❸ USB 2.0 Hi-speed to plug a PC ❹ Ethernet 10/100 Mbit/s ❺ RS232-C 1,200 to 230,400 Baud / 8 Bit Options ❻ Digital I/O interface SUB-D socket connector, 25 pins compliant with IEC/EN 61131-2, Type 1+3 Inputs and outputs are galvanically isolated and protect from reverse polarity. Outputs are short-circuit proof. PNP inputs Start printing / applying a label Print initial label Reprint Delete...

Technical data Tube labeling system Label printers providing AXON 2 SQUIX 4.3MP SQUIX 4MP SQUIX 4MP Print head Thermal transfer Direct thermal Print resolutiondpi Print speedmm/s Print width mm max. Material Tubes / Vials Orientation at the time of a label be applied Print method Length, closure cap included Conicity (change in diameter) Material Width Height Thickness Roll diameter Core diameter Winding Liner mm Thickness Coating Roll diameter mm max. Core diameter mm Length m max. Width mm Printer dimensions and weights Width x Height x Depth mm Weight kg approx. Label sensors / Position...

Technical data  standard Setup options Print Labels Ribbon Label peel-off Apply labels Interfaces Error Technical control Test routines System check Region: - Language - Country - Keyboard - Time zone Time Display: - Brightness - Low-power mode - Orientation Interpreter Receive data Record datastream Warning on a ribbon ending SD memory card plugged USB stick plugged WLAN Ethernet USB slave Time Ribbon winding Warning on a ribbon ending Ribbon ending Label roll ending Print head voltage Print head temperature Print head open Tube / Vial diameter Tube / Vial available Peripheral error...

cablabel S3 software Design, print, administrate cablabel S3 opens up the full potential of cab devices. If designing a label, the modular software adapts to requirements. Plugins are provided, such as the JScript Viewer to support native JScript programming. The user interface and the JScript code synchronize in real time. Features such as the Database Connector can be included, so can barcode verifiers. For further information see www.cab.de/en/cablabel Stand-alone printing Printers in this mode of operation are able to select labels and print them when no host is connected. Labels are...