AXON 2 - Tube labeling system
18Pages

Products need labeling Tube labeling systems

Reliable tube and vial labeling using AXON Tubes

Samples identified in real time Symbols on the control panel support AXON be operated intuitively. Replacing a label roll or a ribbon is no big deal. In cases of cleaning or wear, print rollers and transport rollers are easy to remove using a tool attached. Unique labeling enables samples be assigned quick and reliably in labs. In practice, self-adhesive labels are applied individually to tubes or vials. 1D or 2D encoding enables samples be processed fully automated in transport and filing. AXON has been designed for direct thermal and thermal transfer label printing. 300 dpi or 600 dpi...

AXON 1 tube labeling systems ❶ ❶ ibbon retainer R Materials are easy to remove with the help of a three-part tightening axle. ❷ ntistatic brush A Electrostatic charge dissipates after printing, in particular if plastic materials are in use. ❸ Transport roller Labels are applied to tubes or vials. Height setting according to the length of a tube or vial ❹ ontrol panel C Intuitive operation using self-explanatory symbols Rotation in steps of 90° by software command ❺ Internal liner rewind unit Materials are easy to remove with the help of a three-part tightening axle. ❻ Print roller Synthetic...

Options provided for AXON 1 tube labeling systems 3.1 Cast aluminum cover It prevents from contamination. A large inspection window is provided. CC200-AXON code verifier 1D* codes are checked by a camera. One code per label can be verified in terms of readability (GOODBAD). Results are compared with the print data (VERIFY). *2D codes in preparation Warning on a label roll ending, in preparation Remaining roll diameters are detected by a sensor. The I/O interface indicates predefined minimum values. Diameters may be requested or displayed also using data interfaces. K Type peel-off plate,...

AXON 2 tube applicator See further information on SQUIX 4MP label printers www.cab.de/en/squix Adapted specifically to tubes and vials Labels are applied to tubes or vials of diameters 10 mm to 22 mm. By moving the roller along the shaft to specified positions, closure caps or protruding threads remain located beside the roller. Operations require labels no more than 56 mm wide and a Type 56 peel-off plate. In cases of smaller diameters or wider labels, adapted transport rollers are provided as options. Aligned according to the length of a tube or vial Tubes or vials are pressed against the...

Options provided for SQUIX 4MP label printers 2.1 Slim DR4-M print rollers If narrow labels are in use, accurate print images require adapted print rollers. Enhanced roller wear and contamined print heads are avoided, so are errors during label feed. DR4-M30 - labels no more than 25.4 mm wide DR4-M60 - labels no more than 56.0 mm wide DR4-M80 - labels no more than 76.0 mm wide Peel-off plates Feeding below a pulley promotes labels be dispensed reliably. Type 56.1 - labels nor more than 56 mm wide (Ø14 mm)* Type 56.2 - labels nor more than 56 mm wide (Ø18 mm) Type 110 - labels no more than...

Control panel Intuitive operation Settings are easy to configure using self-explanatory symbols. Landscape or portrait display depending on the orientation of assembly AXON 1 tube labeling system ❷ tatus bar: Receive data, record datastream, S warning on a ribbon ending, SD memory card / USB stick plugged, Bluetooth, WLAN, Ethernet, USB slave, Time ❸ rinter status: Ready, pause, number of labels printed on a print job, P label in peel-off position, awaiting external start signal ❹ SB slot to plug a service key or a memory stick, U to store data in the internal IFFS printer memory ❺ peration...

Interfaces AXON 1 tube labeling system ❶ Slot to plug a SD memory card ❷ USB hosts to plug a service key, a USB stick, 2 a keyboard, a barcode scanner, an USB Bluetooth adapter, an USB WLAN stick or an external control panel ❸ SB 2.0 Hi-speed to plug a PC U ❹ thernet 10/100 Mbit/s E ❺ S232-C 1,200 to 230,400 Baud / 8 Bit R Options ❻ igital I/O interface D SUB-D socket connector, 25 pins compliant with IEC/EN 61131-2, Type 1+3 Inputs and outputs are galvanically isolated and protect from reverse polarity. Outputs are short-circuit proof. PNP inputs Start printing / applying a label Print...

Technical data Tube labeling system Label printers providing AXON 2 SQUIX 4.3MP SQUIX 4MP SQUIX 4MP Print head Thermal transfer Direct thermal Print resolutiondpi Print speedmm/s Print width mm max. Material Tubes / Vials Orientation at the time of a label be applied Diameter mm mm upon request max. Length, closure cap included mm Conicity (change in diameter) % max. Material Labels1) Width mm Height mm at least Thickness mm at least Roll diameter mm max. Core diameter mm Winding Liner Width mm Thickness 2) mm at least Ribbon Coating Roll diameter mm max. Core diameter mm Length m max....

Technical data  standard Setup options Print Labels Ribbon Label peel-off Apply labels Interfaces Error Region: - Language - Country - Keyboard - Time zone Time Display: - Brightness - Low-power mode - Orientation Interpreter Test routines System check Peripheral error Warning on a label roll ending Code verifier* Cover closed* *AXON 1 only Vector / TrueType Font styles Character pitch Cyrillic Western European Eastern European Greek Chinese, traditional Latin Chinese, simplified Hebrew Thai Arabian Widths and heights 1 - 3 mm Zoom factors 2 - 10 0°, 90°, 180°, 270° orientations Widths and...

cablabel S3 software Design, print, administrate cablabel S3 opens up the full potential of cab devices. If designing a label, the modular software adapts to requirements. Plugins are provided, such as the JScript Viewer to support native JScript programming. The user interface and the JScript code synchronize in real time. Features such as the Database Connector can be included, so can barcode verifiers. For further information see www.cab.de/en/cablabel Stand-alone printing Printers in this mode of operation are able to select labels and print them when no host is connected. Labels are...