Automated production line Welding Studs The vast experience of C2G in automated production lines makes it possible to produce high performance, extremely technical, customised systems, from standard generators, welding heads, management systems and automatic stud distributors. JUPITER 1200 - 1800 - 2500 AFF Welding by Drawn Arc Forging, studs with refractory rings. Classic range for welding ø 1 to 25 mm studs. 1800 and 2500 models can be fitted with up to 4 guns. Duty cycle (arcing time factor): 8%. Compatible SIG ®. 1200: ø 1 to 16 studs 1800: ø 1 to 20 studs 2500: ø 1 to 25 studs Important stock of standard studs, available by express dispatch in 24/48 hours from the head office and workshop in MONTBRISON (42). Special manufacturing of specific studs, technical drawings required. Vibrating bowl for DEC - SIG ® - ATC studs Components & accessories Welding gun G20 C and G20C01 Welding under Stud Inert Gas “SIG ® Process” Diameter 1 to 12 mm Welding gun working with SIG® Process fitting on all Jupiter Generators for Ø1 to Ø12 mm studs. SERIE JUPITER 400 i Site generator welding by Drawn Arc Forging, + welding under Stud Inert Gas “SIG ® Process” Diameter 1 to 10 mm Inverter version. Welding by Drawn Arc Forging, + welding under Stud Inert Gas “SIG ® Process” Diameter 1 to 12 mm presetting of parameters. Equipped as standard with 2 outputs for guns. Enable tip discharge welding of ø 3 to 10 mm studs, with a recharge time of under 2 seconds. An extra benefit is that they can be powered from a 220 V single phased current network. SPECIAL generators of + 160 000 μ F can be produced. xy aluminium table with “swan neck” for semi-automatic assembling, cross table travel 80x130 mm max. Mobile storage unit SGC 1000 - 1500 - 2000 - 4000 These low weight, compact, power accumulator generators Blind rivet nuts Compund table Simplified compact version for worksite. Compact and light generator Contact and gap mode version. Blind rivet nuts Cage nuts, thread inserts, self-clinching studs, fixing tool… Welding gun working with ARC Fusion Forging Process, with ceramics, fitting on all JUPITER AFF generators for ø 3 to 16 mm studs. Complementary Fixing Welding gun working with the DischargE Condenser Process contact mode, fitting on all SGC generators for ø 2 to 8 mm studs. Desk for generator with storage boxes for studs. Arm BAE 400/500 Articulated and balanced arm, can hold a G20 gun. Support arm 400/500, acceptable weight up to 8 kg. Pendular arm 700 x 700 mm. Maximum radius: 1150 mm. Welding head TA 1040 Can be used with the 3 standard processes. Power can be supplied by an automatic distributor; it can also be used semiautomatically or manually. Technical changes might be done . Easy blind installation of the thread on thin sheets. Welding nuts Large range of standardized nuts and special nuts. Self-clinching studs Studs are very easily put on sheet of 1 to 3 mm thickness.

SIG® Universal Inventor of the most used stud welding process LEADING-EDGE TECHNOLOGY SIG® , the most recent stud welding process, is ahead of the field in many ways, including : • Excellent stud/part liaison quality • Extra safety and reliability • Productivity 2 to 3 times higher than conventionnal processes • Symmetric studs to simplify automatic feed • Compatibility with ARC and ATC processes • Uses standard, easily-available gases. Assembly quality, reliability and cost efficiency has never been better ! A relatively old process using the safety principle in which the melt bath is protected...