CAPSens 5000 product information
6Pages

NNOVATIVE SENSORS - POWERFUL SOLUTIONS

Frying oils with polar compounds exceeding 27% are considered to be past their best and can pose a health risk for consumers. An increase of polar components leads to lower quality of the oil. Based on the determination of the dielectric constant polar compounds of the frying oil are measured. This is an accepted and fast method and allows a precise determination of oil quality. Therefore, good and healthy frying oil must be checked constantly as top quality is an absolute must in the food and catering industries – a real challenge because constant checks are time-consuming. With the...

CAPSens 5000 Food-Oil-Sensor the device to control your food oil in the kitchen The high precise measurement technique of the food oil sensor CAPSens 5000 will reduce your consumption costs for frying oil significantly. With this unit, you can very easily determine the current soiling level of the frying oil. Determining the total polar components based on changes in the dielectric constant is an established technology and is unsurpassed in terms of measurements accuracy. The relatively large sensor area grants high resolution and thus high precision in the accuracy of measurements. The...

INNOVATIVE SENSORS - POWERFUL SOLUTIONS Technical data CAPSens 5000 Food Oil Sensor (calibration oils excluded) Sensor material Gold / Teflon Display language German, English, French and Japanese. All other languages on

CAPSens 5000 Test-oil 0.0 for calibration You can calibrate the device by yourself by using the certified calibration CAPSens 5000 test oil 0.0. The device reminds you regularly every 60 days about calibration and guides you safely through the test. Article number: 3003-401 CAPSens 5000 Test-oil 4.0 for calibration You can calibrate the device by yourself by using the certified calibration CAPSens 5000 test oil 4.0. The device regularly reminds you every 60 days about calibration and guides you safely through the test. Article number: 3003-402 Telefon: 0041 (0)43 477 85 55 • Fax: 0041 (0)43...

CAPSens 5000 value software for data transfer to a PC (optional) All the measured values are stored with a date and time stamp and can be shown on the display at any time. It is possible to separate the operating unit from the sensor unit for an easy transfer of the measured values to a computer. For this you can use the RS232 interface, the RS232-cable and the CAPSens 5000 value software. Article number: 3003-501 RS232 interface cable for data transfer (optional) All the measured values are stored with a date and time stamp and can be shown on the display at any time. It is possible to...