| Force | Pressure | Temperature | Switch Dual pressure gauges with Combined Unit System built of two separate systems acc. to DIN 38030 Accuracy class 1.0 and 1.6Nominal size: ND 60, 80, 100, 130 Description The dual pressure gauges built with combined unit system (consisting of measurement system, movement and dial) are especially designed for applications with highest demands on pressure measurement like vehicles with pneumatic brakes. They have been developed especially for railway vehicles; but they are also suitable for buses or trucks. Using stainless steel for the housing leads to a good resistance against environmental influences. The measurement system made of a special copper alloy ensures a very good long term stability even at high load cicle conditions. In all versions the dials are illuminated glare-free by a special light conductor. The illumination of the dial is made either indirectly via slots in the housing or directly via bulb or LED in socket BA9s. For special applications illuminating foils, stimulated by a converter, are used. The special design of measuring system, dial and movement as a combined unit system ensures ease of installation in any application. Features O stainless steel case, O protection class IP 43, O accuracy class 1.0 and 1.6 O for use up to full scale value, O 1.3 x overload range, O measurement system of high quality copper alloy Applications Railway vehicles with air pressure brakes, trucks and buses with air pressure brakes e-Mail: [email protected] Internet: www.tecsis.de

1 In the case of lighting over luminous foil, a voltage converter EZE06X002001 is required. For more information see data sheet DE1251.

Model P1546 label flats 22

lightning with bulb view X olive DIN 3861 flats 14 Modifications reserved