Website:
Buss SMS Canzler GmbH
Catalog excerpts
Technology The main component of the Combi Fluidization Technology is the CFT dryer. This dryer is filled with dry product, which is fluidized by the rotor. The wet product is fed into the hot fluid bed and due to the movement of the bed it is evenly distributed throughout the dry product and dried efficiently. The formation of sticky/viscous phases, the direct contact of the wet feed with the heat exchange surface and the consequential formation of crusts are avoided to a large extent. The whole process is comparable to conventional drying with external reflux system, but with the Combi Fluidization Technology the external mechanical work is no longer necessary. The vapour cleaning is integrated into the drying room of the CFT dryer, so that the vapours can be easily processed in a condenser or rectifier. This technology can be used for many different applications, as various heating methods are available and temperatures up to approx. 600°C can be reached. The CFT dryer can be operated under vacuum or overpressure. Many of the slurries and sludges oc-curing in the field of environmental protection, as e. g. paint and varnish sludges, can be processed under atmospheric pressure. The Combi Fluidization Technology also offers a very interesting alternative with regard to cost and energy demand compared to the spray drying of products with sticky phases, if no specific properties and conditions of the dry product are required.
Open the catalog to page 1All Buss SMS Canzler GmbH catalogs and technical brochures
-
Horizontal Thin Film Drye1 Pages
-
Drying Technology16 Pages
-
Evaporation Technology3 Pages
-
Membrane Technology4 Pages
-
HYVAP DZH2 Pages
-
REACTOTHERM®2 Pages
-
Combi-Dryer2 Pages
-
Sewage sludge drying6 Pages
-
High Viscosity Technology8 Pages
-
SMS Technologies24 Pages
-
Short Path Evaporators1 Pages
-
Horizontal Thin Film Drye1 Pages
-
Vertical Thin Film Dryers1 Pages
