Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
RESISTOMAT® Model 2329

RESISTOMAT® Model 2329
4Pages

Catalog excerpts

RESISTOMAT® for Fast Resistance Measurement in Automated Processes Model 2329 2329 EN ■ Measurement range from 200 mQ ... 200 kQ ■ Resolution up to 10 pQ ■ Measurement accuracy 0.03 % Rdg. ■ Automatic measurement range selection ■ Up to 50 measurements and evaluations per second ■ Temperature compensation for all materials ■ Thermovoltage compensation ■ Dry circuit measurement based on DIN IEC 512 ■ Data logger for 20 000 measurement values ■ RS232 and PLC interface standard (IEEE488, USB and Ethernet option) Application The RESISTOMAT® model 2329 is particularly suitable for fast measurements of low resistances in automated processes. Up to 50 measurements per second can easily be performed. The device complies with the latest CE guidelines and is designed for laboratory use as well as heavy-duty industrial applications. A 2-fold and 4-fold comparator with switching outputs has been included for classification and selection; this feature is particularly useful for serial tests. One special application involves the measurement of contact resistances (dry-circuit measurement); the load voltage in this case is limited to 20 mV in order to prevent fritting (DIN IEC 512). The RS232 (standard) and IEEE488, USB, Ethernet (option) computer interfaces allow the set-up of fully automatic testing stations. The PLC interface allows easy integration into your production process control. Typical applications are resistance and conductivity measurements on: ► Fuses ► Airbag triggers ► Coils for the automobile industry and electrical engineering ► Plug-in contacts and switches ► Commutator welded joints ► Meter samples in cable manufacture ► Circuit-board conductors etc. Description The device operates on the basis of proven 4-wire technology which corrects any incoming line or contact resistances. The measurement lines are checked by an integrated cable rupture monitor. Needless to say, the functions include temperature compensation for various test substances such as copper, brass, tungsten etc. Temperatures are measured by a Pt100 sensor or infrared sensor (pyrometer) with analog outputs or any temperature transmitter e.g. thermocouple. For measuring test objects with low inductances, a special measurement input protection was developed to prevent voltage peaks from damaging the device when test objects are disconnected. If objects need to be tested for several different parameters by an automatic measurement system, you can store up to 32 device settings such as measurement ranges, limiting values, temperature coefficients etc. These settings are called up via a bit pattern (5 bits). Naturally, all device settings can also be made via the RS232 (standard) or IEEE488, USB, Ethernet interfaces (option). The integrated data logger can be used during serial measurements to store up to 20 000 measurement values which can be divided into 32 individual blocks. A digital filter is available for preselecting the measurement values to be stored. The evaluation menu of the stochastic data logger displays the maximum, minimum and average values as well as the standard deviation. Technical changes reserved -Latest updates of data sheet always under www.burster.com burster praezisionsmesstechnik gmbh & co kg ■ Tel. +49-7224-6450 ■ Fax 64588 Talstr. 1-5 ■ DE-76593 Gernsbach ■ www.burster.com ■ i

Open the catalog to page 1

Status line I Measurement range, measurement current or 20 mV for dry-circuit measurements Temperature with active temperature compensation or setpoint values with A % display Status line II Error status, the last device adjustment loaded, continuous or single measurement, manual or automatic range selection, measurement sequence R or Z Device and Documentation Software The software model 2329-P001 is especially developed for the device setting as well as for the measurement value evaluation and provides following features: ► Full control of RESISTOMAT® model 2329 ► Online display of the...

Open the catalog to page 2

Applications Fuses 100 % tested Evaluation of the fuse production with device internal statistic program or externally via PC BLOCK: 12 MEMORY12 MEAS.NUMBER: 15 MEAS.VAL.: 123.45mOHM Measured values SIZE: 625 (145) at the data logger DATE: 01.08.95 TIME: 13:12:15.34 CONF RETU BLOCK: 12 MEMORY12 MEAS.VAL. : 123.46 mOHM Data logger MINIMUM: 102.29 mOHM MAXIMUM: 124.18 mOHM evaluation DEVIATION: SIZE: INPU MEAS CONF RETU INPU STAT CONF RETU Measuring start Measuring end Measuring error ok not ok The measurement happens in consideration of the temperature coefficient. For that purpose the...

Open the catalog to page 3

Mains frequency: Power consumption: Temperature drift: Ambient conditions: internal battery back-up via keys or interfaces approx. 5 kg 151 x 237 x 285 [mm] with handles D = 325 mm EN 61010 IP 40 Pt 100 sensor: Analog I/0: Digital I/0: PLC interface: Relay outputs: Model 2329-P001 Model 9900-V165 Model 9900-V609 Model 9900-V172 Model 2329-Z004 Model 2329-Z006 2329 EN - 4 Technical Data Design The device is easy to maintain and equipped with a robust metal housing. Easy accessibility of the individual modules and ideal servicing conditions are thus ensured. All the control elements are...

Open the catalog to page 4

RESISTOMAT® Model 2329 4Pages

Catalog excerpts

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

RESISTOMAT® Model 2329
4Pages