Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Operation manual Torque sensor Model 8655

Operation manual Torque sensor Model 8655
27Pages

Catalog excerpts

Operation manual Torque sensor Model 8655 - 1

OPERATION MANUAL Torque sensor Model 8655 © 2023 Manufacturer: burster burster prazisionsmesstechnik gmbh & co kg prazisionsmesstechnik gmbh & co kg All rights reserved Talstrasse 1 - 5 Postfach 1432 Germany Germany Valid from: June 14, 2023

Open the catalog to page 1

Warranty disclaimer All information in the present documentation was prepared and compiled with great care and reproduced in accordance with effective control measures. This documentation may contain errors, and the information it contains and the corresponding technical data are subject to change without notice. Reproduction of any part of this documentation or its processing or revision using electronic systems is prohibited without the manufacturer’s prior written approval. Components, devices and measurement sensors made by burster präzisionsmesstechnik (hereinafter referred to as the...

Open the catalog to page 2

Operation manual Torque sensor Model 8655 - 3

Name des Ausstellers: Issuer's name: Anschrift des Ausstellers: Issuer's address: Gegenstand der Erklarung: Object of the declaration: burster prazisionsmesstechnik gmbh & co kg Talstr. 1-5 76593 Gernsbach, Germany Dreh momentsensor Torque Sensor Model number/type: Diese Erklarung belnhaltet obengenannte Produkte mit alien Optionen This declaration covers all options of the above product(s) Das oben beschriebene Produkt ist konform mit den Anforderungen der folgenden Dokumente: The object of the declaration described above is in conformity with the requirements of the following documents:...

Open the catalog to page 3

Operation manual Torque sensor Model 8655 - 6

Torque Sensor 8655 1. For your safety The following symbols on the model 8655 torque sensor and in this operation manual warn of hazards. 1.1. Symbols used in the operation manual 1.1.1. Signal words The following signal words are used in the operation manual according to the specified hazard classification. High degree of risk: indicates a hazardous situation which, if not avoided, will result in death or serious injury. A WARNING Moderate degree of risk: indicates a hazardous situation which, if not avoided, may result in death or serious injury. A CAUTION Low degree of risk: indicates a...

Open the catalog to page 6

Operation manual Torque sensor Model 8655 - 7

General safety instructions The model 8655 torque sensor is state of the art, and is safe to operate. However, if the 8655 torque sensor is not used or operated as intended, it may present a hazard. DANGER Electric shock hazard! The following instructions must be followed to prevent electric shock and injuries: • In order to achieve high measuring sensitivity, the model 8655 torque sensor was not designed with the usual safety factors (2 … 20) for machine designs. For applicable overload factors, see the data sheet. • Observe accident prevention regulations, including for accessories used....

Open the catalog to page 7

Operation manual Torque sensor Model 8655 - 8

Torque Sensor 86552. Introduction IMPORTANT: Read the operation manual carefully before using the equipment, and keep it for future reference. The model 8655 torque sensor measures static and dynamic torques on rotating or stationary machine parts in either direction of rotation. You have the option of measuring rotational speed or angular displacement. The respective upper range value is shown on the type plate. For the dual-range sensor, the larger full-scale value is given. The USB version of the 8655 torque sensor transmits all measurement signals via USB. Both the low mass of the model...

Open the catalog to page 8

Operation manual Torque sensor Model 8655 - 9

Ambient conditions • Avoid radiant heat or cooling from one side. • Protect the 8655 torque sensor from moisture. • The 8655 torque sensor is not resistant to chemical agents. Do not use the sensor in a corrosive environment. • Keep the bearings and connectors free of dust, dirt and other foreign matter. 2.3.1. Storage Use clean packaging to package the model 8655 torque sensor. The 8655 torque sensor must be stored under the following conditions: • Dry atmosphere • No condensation • Temperature between 0 °C and 60 °C. DANGER Electric shock hazard! Disconnect the 8655 torque sensor from the...

Open the catalog to page 9

Operation manual Torque sensor Model 8655 - 10

Torque Sensor 8655 2.5. Contents of pack • Torque sensor model 8655 • Mating connector • Digital operation manual on our website (www.burster.com) • Digital data sheet on our website (www.burster.com) • Optional: USB cable DANGER Electric shock hazard! Never connect up the 8655 torque sensor if the sensor shows signs of damage incurred in transit. Only ever use the 8655 torque sensor under the conditions specified in this operating manual. Inspect the model 8655 torque sensor for damage. If you suspect that the unit has been damaged during shipping, notify the delivery company within 72...

Open the catalog to page 10

Operation manual Torque sensor Model 8655 - 11

Modifications and maintenance The warranty shall be deemed void immediately if you open or dismantle the model 8655 torque sensor during the warranty period. The model 8655 torque sensor does not contain any parts that are intended to be serviced by the user. The transmission system in the model 8655 torque sensor is maintenance-free. Only the manufacturer’s own qualified personnel are permitted to open the model 8655 torque sensor. It is not permitted to make any changes to the model 8655 torque sensor without the written agreement of burster präzisionsmesstechnik gmbh & co kg. burster...

Open the catalog to page 11

Operation manual Torque sensor Model 8655 - 12

Test side The torque being measured is applied to the shaft on the test side of the 8655 torque sensor. This side normally has the smallest moment of inertia. You will see these markings on the test side of the model 8655 torque sensor: Test side, model 8655 torque sensor Drive side The drive side is the opposite side to the test side. The model 8655 torque sensor is also mechanically connected on this side. This side normally has the larger moment of inertia. You will see these markings on the drive side of the model 8655 torque sensor: Drive side, model 8655 torque sensor The torque...

Open the catalog to page 12

Operation manual Torque sensor Model 8655 - 13

Sign convention for torque measurement If the shaft of the model 8655 torque sensor rotates clockwise (looking at the drive side), channel A leads channel B by 90°. If the shaft of the model 8655 torque sensor rotates counterclockwise (looking at the drive side), channel B leads channel A by 90°. Static and quasi-static torques Static and quasi-static torques change their value only slowly or not at all. As long as they are below the rated torque, these torques can take any value. Dynamic torques A dynamic torque changes very rapidly and can even oscillate. In this case the frequency of the...

Open the catalog to page 13