Catalog excerpts
![Data Sheet Typ 9307 - 1](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_1m.jpg)
Delivery: ex stock/2 weeks | Warranty: 24 months/option 36 months Universal Process-Controller For monitoring press-fit and joining operations, torque and process curves, plus spring and switch testing, including resistance measurement, signal testing and leak detection DIGIFORCE® Series 9307 The DIGIFORCE® 9307 monitors processes in which precisely defined functional relationships between two or more measured quantities need to be demonstrated. These measured quantities are recorded synchronously during the manufacturing process or subsequent functional testing to produce a measurement curve, which is then assessed using graphical and mathematical evaluation techniques. After internal evaluation, the measurement curve and computed evaluation results are visualized on the color display and are also output at the external control interfaces. The processes in the controller are optimized by a powerful real-time operating system to achieve an extremely fast evaluation cycle: it typically takes just 15 ms to deliver the global OK or NOK evaluation result, which can then be analyzed by the higher-level controller. In addition to the traditional evaluation windows with defined entry and exit sides, the DIGIFORCE® 9307 also offers thresholds, trapeziums of type X or Y and envelopes as graphical evaluation elements. Individual evaluation results from the graphical tools can then be combined by mathematical operations to provide even more analysis flexibility for a huge range of signal curves. DIGIFORCE® has a wide range of process control applications, including monitoring processes such as joining, riveting or caulking, or checking torque curves, for instance for hinges or high-quality rotary controls. Even complex signal/time curves (e.g. pressure curves, leaks etc.) can be monitored using the large choice of evaluation techniques. Simultaneous recording of up to two Y variables (Y1 and Y2) with respect to a common X variable allows many applications to Technical changes reserved. All data sheets at www.burster.com Comprehensive process monitoring delivered by innovative evaluation elements window, thresholds, trapeziums, envelopes and mathematical operations High measurement accuracy 0.05 % possible at 10 KHz sampling rate Flexible process integration thanks to a range of Fieldbus interfaces Simultaneous monitoring of two synchronous processes Ultra-fast evaluation and data transfer for dynamic measurements Ethernet, USB, RS232 as standard Up to 128 measurement programs for a large variety of parts Transfer of process, component and worker data Intelligent signal sampling using a combination of ∆t, ∆X, ∆Y Automatic sensor recognition from burster TEDS DigiControl PC software with powerful data-logging function for process data use one DIGIFORCE® controller to monitor two synchronous processes. Alternatively, this feature can be used to evaluate an application with three process variables, for instance the force/ displacement curve and associated current consumption of a lifting electromagnet. While DIGIFORCE® is used in many automated production areas, it is equally at home in the manual workstation, for instance to monitor force/displacement when using hand presses for assembly or for random spot-checking in goods inwards. burster praezisionsmesstechnik gmbh & co kg Germany Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 www.burster.com info@burster.com
Open the catalog to page 1![Data Sheet Typ 9307 - 2](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_2m.jpg)
Block diagram Sensor excitation: Strain gauge, Poti, Transmitter 32 Bit µP Embedded Real-time operating system Ultra-fast measurement recording and evaluation USB Measurement data memory X,Y1,Y2 (Ring buffer) SPS E/A 23 input 31 output (configurable) Fieldbus PROFIBUS DP, DP-V1 PROFINET, EtherNet/IP, EtherCAT PC or PLC communication Numerical keyboard 5,7“ LCD color graphic Measurement data acquisition With an active measurement, which can be triggered by different events, the synchronously measured quantities X,Y1 and optionally Y2 are saved in the measurement data memory. Real-time...
Open the catalog to page 2![Data Sheet Typ 9307 - 3](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_3m.jpg)
Trapezium evaluation element Mathematical operation The DIGIFORCE® 9307 offers two different types of trapezium: the type-X trapezium window with fixed XMIN, XMAX limits and type-Y trapezium with fixed YMIN, YMAX limits. The trapezium evaluation element tests whether the curve has passed through the defined entry and exit sides; only one entry side can be configured for this element. The entry/exit values are calculated. Threshold evaluation element Specific measurement curve variables and results from the graphical evaluation elements can be combined using basic mathematical operators (+,...
Open the catalog to page 3![Data Sheet Typ 9307 - 4](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_4m.jpg)
Process data The DIGIFORCE® 9307 visualizes a comprehensive set of process data during measurement mode and automatic production mode. All relevant process data can be transferred to the controller or PC environment immediately after a measurement. The user can switch between the following process windows: ► M1-1/2 Graph of Y1(X) or Y2(X) measurement curve Shared display of Y1/2(X) curves General display of Y1(X) or Y2(X) curves Full-screen PASS/FAIL or smiley Entry/exit data for evaluation elements List of user-specific process values (up to 24 values) Statistics on all graphical...
Open the catalog to page 4![Data Sheet Typ 9307 - 5](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_5m.jpg)
Fieldbus interface An independent communication processor provides the Fieldbus interface via PROFIBUS, PROFINET, EtherCAT or EtherNet/IP. Cyclical realtime process data ► Process control ► Retrieval of specific measurement results ► Live values of the active sensors Non cyclical parameter/ADMIN/result data ► Transfer of component/worker/job data for logging ► Complete device configuration ► Retrieval of large amounts of process and curve data 32/128 measurement programs The DIGIFORCE® 9307 comes with the capability to manage up to 32 measurement programs, which can be rapidly selected via...
Open the catalog to page 5![Data Sheet Typ 9307 - 6](https://img.directindustry.com/pdf/repository_di/13615/data-sheet-typ-9307-1079910_6m.jpg)
General Technical Data Communication Interfaces Sampling rate: 10 kHz Signal sampling: ∆X, ∆Y, ∆t in any combination Measurement curves: Y1 (X) and Y2 (X) Digitalization: 16 bit Evaluation time: 15 ms Measurement programs: 32 (5,000 value pairs)* / 128 (400 value pairs) Power supply: 90 ... 264 VAC / 47 ... 63 Hz / typically 30 VA Delay in real-time limit signals S1 ... S4: < 10 ms Operating temperature range: + 5 ... + 23 ... + 40°C Protection class: IP30 / IP65 panel-mounted Display: 5,7“ TFT LCD (640 x 480) Keypad: numerical, configurable function keys * Factory-installed device...
Open the catalog to page 6All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures
-
Torque Sensors
9 Pages
-
Data Sheet Typ 8656
7 Pages
-
Data Sheet Typ 8655
7 Pages
-
Press fitting - the reliable way
11 Pages
-
Data Sheet Model 2511
6 Pages
-
Data Sheet Typ 8625
7 Pages
-
Data Sheet Model 9243
2 Pages
-
Data Sheet- Model 2500
2 Pages
-
SENSOR SOLUTIONS
1 Pages
-
A CONNECTION THAT NETWORKS
1 Pages
-
Quality leading the way
3 Pages
-
Data-Sheet - 9251
6 Pages
-
Data Sheet Model 9210
5 Pages
-
Flyer Load Experts
1 Pages
-
Data Sheet 8427
7 Pages
-
Displacement Sensors
2 Pages
-
Displacement Sensors
2 Pages
-
Data Sheet Typ 87240
2 Pages
-
Data sheet Typ 8416
6 Pages
-
Load cells
25 Pages
-
Data Sheet Model 8402
6 Pages
-
Flyer Load Experts
1 Pages
-
Data Sheet - Model 8438
6 Pages
-
Data Sheet Model 8400-B001
2 Pages
-
Sensor Solutions
1 Pages
-
A Connection that Networks
1 Pages
-
Qualitiy leading the way
3 Pages
-
Data Sheet Model 9250
7 Pages
-
Data Sheet Model 9235
2 Pages
-
Data sheet Model 8435
7 Pages
-
Data Sheet Typ 8417
7 Pages
-
Data Sheet Typ 8532
2 Pages
-
Torque Sensors
9 Pages
-
Data Sheet Typ 8627
2 Pages
-
Data Sheet Model 8527
7 Pages
-
Data Sheet Model 8526
9 Pages
-
Data Sheet Model 8431
12 Pages
-
Data Sheet Typ 9311
6 Pages
-
Data Sheet Model 8511
6 Pages
-
Data Sheet - DIGISTANT® 4463
5 Pages
-
Data sheet Series 8738
2 Pages
-
Torque Sensors
16 Pages
-
Data Sheet Model 8630
6 Pages
-
Data Sheet Models 8710, 8711
2 Pages
-
Data Sheet Typ 8740/8741
4 Pages
-
Data Sheet Models 8712, 8713
2 Pages
-
Load-cell
25 Pages
-
Data Sheet Motel 8451
7 Pages
-
Procision to the core
3 Pages
-
Flyer Battery Tester
1 Pages
-
Data Sheet Model 2560
5 Pages
-
Data Sheet Model 8561
6 Pages
-
Data Sheet Model 2311
5 Pages
-
Data Sheet Model 8523
8 Pages
-
Data Sheet Series 87350
2 Pages
-
Operation manual
76 Pages
-
Data Sheet Typ 8739
2 Pages
-
Load-cell
25 Pages
-
Data Sheet Motel 8565
5 Pages
-
Data sheet Model 8631
5 Pages
-
Data Sheet Model 8718
2 Pages
-
Data Sheet Typ 8512
5 Pages
-
Data-Sheet- Model 8228
6 Pages
-
Data Sheet Model 8510
5 Pages
-
Data Sheet Model 8415
6 Pages
-
RESISTOMAT® Model 2329
4 Pages
-
Data Sheet Model 8524
8 Pages
-
Data Sheet Model 2550
4 Pages
-
Data Sheet Model 9186/8532
2 Pages
-
Data Sheet Typ 8645
5 Pages
-
Data sheet Model 8709
2 Pages
-
Flyer Displacement Sensor
2 Pages
-
Data Sheet - Model 8670
4 Pages