Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Data Sheet Typ 8512

Data Sheet Typ 8512
5Pages

Catalog excerpts

Delivery: 1-2 weeks | Warranty: 24 months S-Beam Tension and Compression Load Cell MODEL 8512 Highlights M easuring ranges from 0 … 20 N to 0 … 880 N Non-linearity < 0,25 % v.E. M any load cycles Protection class IP54 E xcellent price-performance ratio Option 3-fold overload protection Applications Dosing system Automated tool testing T ension force measurement for wire or thread winders T est and analysis systems in the pharma industry Withdrawal force Measuring loads in cable systems Product description Cable outlet with strain relief Overload protection in compression direction The measuring element of this load cell consists of a double bending beam with strain gages, the resistance of which changes with the application of force. Upon applying a voltage to the strain gage bridge, the change in the strain gage resistance is converted into output voltage, which is directly proportional to the force. The strain gages and the entire measuring element are protected from water spray by metal cover including sealing material. The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop. burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burster.

Open the catalog to page 1

Relative non-linearity* Characteristic curve deviation* Relative hysteresis Temperature effect on zero output Temperature effect on nominal sensitivity Electrical values Tension and compression direction. Load calibration in compression direction The full-scale output is likely to be different when used in the tension direction. Positive signal in compression direction Sensitivity nominal Measurement direction Standardization** Bridge resistance Excitation 350 Q nominal (deviations are possible) * The data in the area 20 % - 100 % of rated load Fnom ** Realized on board in connection cable,...

Open the catalog to page 2

Dimensional drawing 15.00 Option Standardization Cable extension TEDS in cable Electrical termination Output signal burster load cells are based on a strain-gage Wheatstone bridge. This measurement principle means that the output voltage mV/V is highly dependent on the sensor supply voltage. Our website contains details of suitable instrumentation amplifiers, indicator and display devices and process instruments. burster TEDS TEDS I The "burster Transducer Electronic Data Sheet" (TEDS) is a memory in which identification data of the sensor, calibration data and other sensor parameters are...

Open the catalog to page 3

Options Overload protection in compression direction The optional overload protection guards the load cell against damage at a static compression force up to 300 % of its service load. Protection is achieved via a mechanical stop, which limits the measurement displacement of the sensor. Test and calibration certificate burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 4

Order Code Measuring range ■ Nominal sensitivity/not standardized Delivery ex stock at short notice Note Brochure Our brochure „Load cells for production, automation, R&D and quality assurance" is available for download on our website. It conatains numerous applications, detailed product specifications and overviews. Product videos Watch our How-to-do video at: www.youtube.com/bursterVideo Tube ■ CAD data Download via www.burster.com or directly at www.traceparts.com burster Sensors and Process Instruments - Technical changes reserved. All data sheets at www.burster.com

Open the catalog to page 5

Data Sheet Typ 8512 5Pages

Catalog excerpts

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

Data Sheet Typ 8512
5Pages