Delivery: ex stock | Warranty: 24 months Miniature Tension and Compression Load Cell MODEL 8417 Highlights Measuring ranges from 0 ... 10 N up to 0 ... 5 kN Very small dimensions Low dead weight Easy mounting via long fixing threads Options burster TEDS Vacuum compatible design Rod ends available as add-on part Various cable lengths can be ordered Applications Girder assembly Measuring ranges from 0 ... 10 N Tool manufacturing Machinery manufacture Aviation industry Product description With rod ends as accessories Load cell model 8417 measures the tension or compression force between both axially mounted metric exterior threads on the cylindrical sensor housing. Forces are only applied to the threadings, which are especially long, to accommodate counter nuts and must not be affected by external influences such as bending, lateral force or torsion. Any contact with units affixed to the sensor housing - even on the front must be avoided. The measurement element is a membrane perpendicular to the axis of the sensor with a strain gage full bridge applied to the inner surface, which requires stable excitation with a rated value of approx. 1 mV/V. The connection cable is led radially out of the housing through a sleeve which is used for strain relief. burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burster.com

Measuring range calibrated in N and kN from 0 ... Accuracy Relative non-linearity* Characteristic curve deviation* Relative hysteresis Temperature effect on zero output Temperature effect on nominal sensitivity Sensitivity nominal Tension and compression direction. Calibration and positive signal in compression direction. The full-scale output is likely to be different when used in the tension direction. Measurement direction 0.8 mV/V (±0.25 %), option realized on an circuit board 48 x 7 mm (L x W) at the cable after 1.7 m from sensor or 0.3 m from cable end Standardization** Bridge resistance...

Dimensional drawing Model 8417 . Measuring range from 0 ... General tolerance of dimension Mounting The measuring force has to be applied centrically and free from lateral force via the exterior threading into the sensor body. Transverse forces must be kept away from the sensor as they could result in incorrect measurements or damage. Mounting instructions In order to ensure that the force sensor is securely fitted in its installation position, it can be locked or glued to the thread. When applying compression force, appropriate means (e.g. attachments) are to be used to prevent buckling. During...

Electrical termination Output signal burster load cells are based on a strain-gage Wheatstone bridge. This measurement principle means that the output voltage mV/V is highly dependent on the sensor supply voltage. Our website contains details of suitable instrumentation amplifiers, indicator and display devices and process instruments. Excitation + (white/red)*** Output signal - (green) burster burster TEDS The "burster Transducer Electronic Data Sheet" (TEDS) is a memory in which identification data of the sensor, calibration data and other sensor parameters are saved. In conjunction with your...

Compatible for measuring range from 0 ... Stat. load factor Connectors and units Order code Connectors 9941 Connectors 12 pin, suitable to all burster desktop units Connectors 9 pin, suitable to SENSORMASTER, DIGIFORCE® and TRANS CAL Connectors 9 pin with TEDS Connectors 8 pin, suitable to ForceMaster Mobile measuring device with strain gage simulator and sensor test (Ri, Ra, Shunt, RISO) Sensor electronics, amplifier and process control units like digital indicator model 9180, model 9163, modular amplifier model 9250 or DIGIFORCE® burster Sensors and Process Instruments – Technical changes reserved....

Calibration Test and calibration certificate Supplied with the sensor Amongst other data, includes figures for zero point, full-scale output and calibration offset Standard factory calibration certificate for load cells or measurement chains (WKS) Optionally available Our standard factory calibration is performed in 20% steps starting from zero until the reaching the nominal force, for increasing and decreasing load with unchanged installation position. Factory calibration can be performed in compression and/or tension direction. Special factory calibration certificate for load cells or measurement...

Order Code Measuring range 0 ... Delivery ex stock at short notice N 8 Nominal sensitivity/not standardized Connection cable 1.7 m (with standardization in the cable 2 m) Connection cable 3 m extended * Connection cable 5 m extended * (with sens line) * shortened delivery time compared with cable length 3 m and 5 m in one piece Open cable ends + 6 cm single strands 9 pins Sub-D connector model 9900-V209 9 pins Sub-D connector model 9900-V209 for 9163-V3xxxx 12 pins round connector model 9941 for burster desktop devices 9 pins Sub-D connector with burster TEDS model 9900-V229 8 pins coupling connector...