Measuring ranges from 0 ... 5 bar to 0 ... 1000 bar For liquid and gaseous media Can be used for dynamic and static measurements Made of stainless steel, reliable, sturdy Model number 8201 precision pressure sensors are robust, economical, and are available in standard measuring ranges. Their good technical specification and high reliability make them optimum for measuring pressure in all fields of machine construction, process technology, as well as in measurement and control technology. The measuring element of the precision pressure transducer consists of a diaphragm. On its reverse side a strain gauge rosette is applied, which is an assembly of 4 active strain gauges arranged in a bridge circuit. The pressure is measured against atmosphere, that means the space behind the diaphragm is connected to the surrounding atmosphere (relative) via a small outlet in the housing. The pressure transducers are easy to handle and immune to shock loads and vibrations as they are designed without moving parts. All pressure transducers without an internal amplifier have a standardized output signal of 1.0 mV/V. This enables the user to change a transducer in a measuring chain as liked without following readjustment of the electronic. Each transducer is available with an internal amplifier, a socalled pressure transmitter, with voltage or current output. The input of the internal amplifier is immune against polarity reversal and the output is immune against over-voltage. Customized designs are available on request. Aeras of application are: ► Hydraulic or pneumatic machines ► Mechanical engineering ► Plant control and monitoring Technical changes reserved. All data sheets at www.burster.com burster praezisionsmesstechnik gmbh & co kg Germany www.burster.com Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 [email protected] High Precision Pressure Transdu

Technical Data Electrical values Bridge resistance: full bridge circuit of foil strain gauges 350 Ω, nominal Calibration resistor: 100 kΩ The bridge output voltage resulting from a shunt of this value is shown in the test certificate. Excitation voltage: recommended 5 V DC maximum 10 V DC Nominal sensitivity: standardized; 1.0 mV/V ± 0.25 % Environmental conditions Range of operating temperature: Nominal temperature range: Influence of temp. measuring range on zero: measuring range Influence of temp. measuring range on sensitivity: measuring range Mechanical values Measurement accuracy: Combined...