Delivery: ex stock | Warranty: 24 months Mobile Display Device Highlights Easy to operate F or all load cells, pressure sensors and torque sensors based on strain gages Tare function Excellent value for money Built-in charge controller Applications Test mechanical components and machines in production upport for servicing, commissioning and maintenance work S on electromechanical and hydraulic equipment obile comparative measurements with existing measuring M instruments Product description The 7270 TRANS CAL can run on standard or rechargeable batteries for portable use or from an external power supply. The handy model 7270 digital indicator supports load cells, pressure sensors and torque sensors based on strain gages. The 14 mm high display shows the current measured value. The TARE function allows any base load that may be present to be zeroed. The clear, well organized control structure enables quick and easy configuration of the TRANS CAL. Case 7270-Z001 The 7270 is equipped with a charge state indicator. burster Sensors and Process Instruments – Technical changes reserved. All data sheets at www.burster.com

Technical Data Device Accuracy Measuring rates Display range Zero point setting manual (tare function via buttons) Sensor parameter sets Sensors (strain gage full bridge) Excitation voltage Connection type Input impedance Measuring ranges General data Supply voltage 0.5 W (with connected full bridge strain gage) Battery operation approx. 10 hours (1300 mAh NiMH battery) / approx. 6 hours 1500 mAh (alkaline battery) Operating temperature range Storage temperature range Protection class 370 g D-SUB 9 pin female connector (sensor connector) hollow socke 2.1 mm/5.5 mm, 10 mm length (voltage supply)...

Accessories Order Code 7270-Z001 Calibration device Standard factory calibration certificate for instrumentation amplifiers (WKS) Optionally available Our standard factory calibration certificate includes 11 measurement points, starting at zero, spread evenly in 20% steps over a measuring range. Special factory calibration certificate for instrumentation amplifiers (WKS) On request We are happy to calibrate instrumentation amplifiers to the customer‘s specification. German-accredited DAkkS calibration certificate for instrumentation amplifiers (DKD) Optionally available Our DAkkS-certified calibration...