Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Data sheet Series 8738

Data sheet Series 8738
2Pages

Catalog excerpts

High-precision Incremental Displacement Sensor Series 8738 ► Monitoring both slow and fast movements between machine parts ► Measurements of position and positional changes in components and structural foundations, of servo regulators, valve and robot controllers ► Measurement of growth, and so on Technical changes reserved. All data sheets at www.burster.com Vibration resistant and dust proof Typical applications include: Incremental magnetic measuring heads offer maximum precision over the full range of measurements. As a result of the magnetic operating principle and the robust mechanical construction, they are insensitive to soiling and are therefore ideally suited to use in production facilities. Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development etc.). Measuring ranges between 0 ... 5 mm and 0 ... 100 mm High protection class up to IP66 Description The incremental displacement sensors are based on a magnetic principle: consisting of a magnetic scale and a multi-slot reading head that responds to changes in magnetic flux, they detect linear movements with high precision and resolution. The scale of ferromagnetic alloy – or magnetic tape – is magnetized by an alternating magnetic field with a pole spacing of 0.2 mm. A special recording head and a laser measurement system guarantee that the graduations are very precise. From the magnetic pattern on the scale, the multi-slot reading head generates a signal proportional to the movement. The analog signal generated by the reading head is electronically divided and digitized. Changes in length can be measured with a resolution of from 1 µm down to 0.1 µm. Thanks to its slim shape with a diameter of 8 mm and its high accuracy over the full range of measurements, model 8738 DK is particularly suitable for use in multi-point measuring equipment. The spindle and spindle guide are protected from dust by a bellow. burster praezisionsmesstechnik gmbh & co kg Germany Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450

Open the catalog to page 1

Technical changes reserved. All data sheets at www.burster.com burster praezisionsmesstechnik gmbh & co kg Germany 'www.burster.com Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 info@burster.com

Open the catalog to page 2

Data sheet Series 8738 2Pages

Catalog excerpts

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

Data sheet Series 8738
2Pages