Catalogs >
burster präzisionsmesstechnik gmbh & co kg >
Data Sheet - Portable Precision USB Sensor Interface Series 9206

Data Sheet - Portable Precision USB Sensor Interface Series 9206
4Pages

Catalog excerpts

Data Sheet - Portable Precision USB Sensor Interface Series 9206 - 1

Portable Precision USB Sensor Interface for load cells, torque sensors and pressure sensors Series 9206 “Plug & Measure” interface for strain gauge sensors, potentiometric sensors and standard signals 6-wire connection technology Practical and convenient DigiCal calibration and data acquisition software 24-bit resolution Free LabView driver DLL for integrating in your own software environment Multipurpose reference measurement chain with optional factory calibration certificate or German-accredited DAkkS calibration certificate Pt100 as option Application The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. This provides a quick, cost-effective way of assessing your system with traceable documentation of measurement results. The device is intended for industrial use in sectors such as quality assurance, on-site service and equipment monitoring. Further areas and examples of use: ► Test-equipment calibration ► On-site calibration of high-precision measurement instruments ► Hydraulic-press testing ► Reference measurements on/in assembly lines ► Testing of robot contact forces ► Pneumatic pressure testing Description The USB sensor interface is powered from the connected PC via the USB port, and uses this power supply to generate the sensor excitation voltage. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer. The DigiCal calibration software can display the measurement data in various forms and save it in a custom report file or Excel file. The software includes calibration-routine management for quick comparisons of existing measurement data plus rapid and reliable access to recurring calibration processes. In addition, a range of START/STOPP-triggers can be enabled. burster can configure the interface to suit a specific sensor, although you can customize your own parameters using the basic software version supplied free of charge. The driver package, available free of charge, lets you integrate the device in LabVIEW or your own software. Technical changes reserved. All data sheets at www.burster.com burster praezisionsmesstechnik gmbh & co kg Germany www.bursler.com Talstr. 1-5 Gernsbach 76593 Phone +49-7224-6450 info@bursler.com

Open the catalog to page 1

Data Sheet - Portable Precision USB Sensor Interface Series 9206 - 2

Application Precision force check of electrical, mechanical or hydraulic presses Reference force measurement chain including 9206 USB sensor interface and DigiCal PC software ► Maximum precision and traceability even under on-site conditions ► System has high IP 67 degree of protection ► DigiCal software provides OK/NOK evaluation of measurement values, retriev- al of measurement data, export of evaluation results plus report generation ► Reference load cell in line with the force path ensures optimum comparative measurements in difficult-to-access locations Application Torque wrench...

Open the catalog to page 2

Data Sheet - Portable Precision USB Sensor Interface Series 9206 - 3

Pressure-line testing DigiCal PC software A pressure measurement chain comprising pressure sensor and USB sensor interface can be connected directly to the PC. The DigiCal software can then be used to read the sensor data, which is then available for printing as a report or exporting into Excel. On-site calibration uses a reference pressure sensor, a USB sensor interface and a manual pump to check the indicator on a pressure line. An optional factory calibration certificate or German-accredited DAkkS calibration certificate can be supplied to ensure traceability of the pressure measurement...

Open the catalog to page 3

Data Sheet - Portable Precision USB Sensor Interface Series 9206 - 4

Aluminium 115 x 25 mm 200 g IP67 tube housing IP40 tube housing with 12 pin connector screw clamp via USB-plug 4 V ... 6 V max. 3 m 2.8 m terminal block PG 7 connection PG 7 connection (including measurement and analysis software 9206-P001-REF) Technical Data Connectable sensors Strain gauge Bridge resistance: Connection system: Sensitivity: Sensor excitation:: Excitation current: Measurement error: Transmitter and DC/DC sensors Sensor excitation: Excitation current: Measurement signal: Measurement error: General amplifier data Resolution: 24 Bit Measuring rate ecxept Pt100: up to 1200...

Open the catalog to page 4