Data Sheet - Portable Battery-Operated Microohmmeter RESISTOMAT® Model 2323
2Pages

{{requestButtons}}

Catalog excerpts

Data Sheet - Portable Battery-Operated Microohmmeter RESISTOMAT® Model 2323 - 1

Portable Battery-Operated Microohmmeter RESISTOMAT® Mains rechargeable battery operation High resolution up to 0.1 µΩ Measuring current up to 10 A Input protected up to 415 Vrms Rugged industrial design RS232 data output This portable, battery-operated microohmmeter is a practical instrument for low resistance measurement in the field. It is of rugged construction, contained in a sealed ABS plastic case with lid and carrying handle, ideal for use in the production and any other working field or test and service facilities. The documentation of the measuring values is effected via RS232 interface directly to an external printer or PC. Further it is possible to perform single measurements via an external start switch. Any of the 8 measuring ranges can be selected by a key on the membrane keyboard. The measuring results are displayed on a 6000 counts LED display. The measuring terminals are protected up to 415 volts rms. Typical applications are measurements on ► ► ► ► ► ► ► Engine and transformer windings Electrical connectors Heating elements Connections on power rails Wires and cable drums Quality of soldered and welded joints Switching contacts Technical changes reserved Latest updates of data sheet always under www.burster.com Four-wire technology in accordance with KELVIN eliminates transition and lead resistance. By forward and reverse current measurement with automatic average a thermocouple compensation can be realized which is inevitable for certain measurements. The digital calibration of this instrument is activated by a key on the front panel. The integrated rechargeable battery allows measurements up to 10 hours. burster praezisionsmesstechnik gmbh & co kg . Tel. +49-7224-6450 . Fax 64588 Talstr. 1-5 . D-76593 Gernsbach . www.burster.co

Open the catalog to page 1
Data Sheet - Portable Battery-Operated Microohmmeter RESISTOMAT® Model 2323 - 2

Technical Data Measuring Resolution Measuring Range Current Calibration set: The calibration set model 2323-Z001 consists of 4 calibration resistors series 1240 with the values 500 µΩ, 5 mΩ, 50 mΩ and 500 mΩ. Every resistor is provided with a DKD/DAkkS Calibration Certificate. Measurement values and uncertainties indicated in the certificate were found with standards and measurement devices regularly compared with governmental standards of the Federal Republic of Germany. This is proved in the certificate itself and is also marked on the resistor. For detailed information please refer to...

Open the catalog to page 2

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Load cells

    25 Pages

  2. Load cells

    25 Pages

  3. Torque Sensors

    16 Pages

  4. Load-cell

    25 Pages

  5. Load-cell

    25 Pages